User Guide

BONDING
TAPES
PERFORMANCE
LABEL
MATERIALS
COMMERCIAL
GRAPHICS
RELEASE
LINERS AND
PRINTABLE
FILMS
SINGLE COATED
TAPES
RECLOSABLE
FASTENERS
SPECIALTY
PRODUCTS
FLEXOGRAPHIC
MOUNTING
38
Adhesive Families–Label Materials
Note: This technical information and data should be considered representative or typical only and should not be used for specification purposes.
100 High Temperature Acrylic
• Up to 450°F short-term heat
resistance and excellent
solvent resistance.
• High peel strength compared
to other acrylic formulations.
• Exceptional shear strength
even at elevated temperatures.
• Exhibits low outgassing
characteristics.
150 High Temperature Acrylic
• Up to 450°F short-term heat
resistance and excellent solvent
resistance.
• High internal strength ideal for
applications on high surface
energy plastics and metals.
200 High Performance Acrylic
• Up to 350°F short-term heat
resistance and medium
solvent resistance.
• Excellent peel strength on
metal and HSE plastics.
• Good long term aging.
200MP High Performance Acrylic
• Up to 400°F short-term heat
resistance and excellent
solvent resistance.
• Outstanding adhesion to
metal and high surface energy
plastics.
• Excellent shear strength to
resist slippage and edge lifting.
• Short term repositionability for
placement accuracy.
300 High Strength Acrylic
• Up to 250°F short-term heat
resistance.
• Greater initial adhesion
especially to low surface
energy plastics.
• Quick flowing to speed
lamination of textured plastics,
foams, fabrics, and coated
papers.
310 High Precision Acrylic
• Provides firmness and high
precision strength on a variety
of surfaces including HSE
plastics and metals.
• Compatible with a variety
of print technologies including
thermal transfer and laser
printing.
320 High Tenacity Acrylic
• Up to 250°F short-term heat
resistance.
• High bond strength to a variety
of surfaces.
• Excellent flagging resistance
on small diameter surfaces.
350 High-holding Acrylic
• Ideal for very high bond strength
to many surfaces.
• Most universal adhesive – ideal for
powder coatings, LSE plastics,
and oily metals.
• Up to 350°F short-term heat
resistance and excellent solvent
resistance.
400 Low Temperature Acrylic
• Good low temperature
performance and peel strength
on many surfaces.
• Up to 250°F short-term heat
resistance.
• Excellent adhesion to uncoated
papers.
• Clarity and UV resistance for
window label applications.
500 High Stability Acrylic
• Cleanly removes from most
surfaces up to one year after
application.
• Excellent for die-cut masks
needing outdoor performance
and removability.
• For vinyl label stocks only.
550 Permanent/
Removable Bond Acrylic
• Provides permanent bond
strength to a wide variety
of surfaces, yet removes cleanly.
• Because the adhesive level
neither builds nor degrades
over time, it will remove
cleanly from most HSE
materials.
• Clean for electronics.
700 High Bond Synthetic Rubber
• Up to 200°F short-term heat
resistance.
• High peel strength to low
surface energy substrates.
• For indoor and room
temperature application.
1000 Repositionable Acrylic
• Good holding to many
surfaces.
• Clean removal or numerous
reapplications.
• Stain resistance on many
surfaces.
1100 Wet-surface Acrylic
• Bonds to wet or damp
surfaces.
• Good adhesion to a variety
of surfaces including glass,
plastic, wood and metal.
• Meets TAPPI #213 for
repulpability.
AP-360 General Purpose Acrylic
• Firm adhesive for a broad
range of applications,
including attachment to
low-surface energy plastics.
• High initial adhesion and
excellent aging characteristics.
• Ideal for opaque films.