User Guide

BONDING
TAPES
PERFORMANCE
LABEL
MATERIALS
COMMERCIAL
GRAPHICS
RELEASE
LINERS AND
PRINTABLE
FILMS
SINGLE COATED
TAPES
RECLOSABLE
FASTENERS
SPECIALTY
PRODUCTS
FLEXOGRAPHIC
MOUNTING
3M
™
Performance Label Materials — Pharmaceutical and Performance Paper
Facestock Product Typical Performance Characteristics Construction Roll Width Print Specs
Caliper Facestock Minimum Method
Mils Adhesive Type
Liner
NOTE: This technical information and data should be considered representative or typical only and should not be used for specification purposes.
Paper 7002 Facestock provides excellent graphic
reproductions. Excellent flag resistance on
small diameter vials.
4.0
0.9
2.5
60# Bright White High Gloss
320
43# Densified Kraft
60"
1668' Min.
Flexo RoHS
7004 Excellent quick stick and adhesion to low
surface energy plastics.
2.8
0.9
2.5
60# Bright White High Gloss
300
43# Densified Kraft
54"
1668' Min.
Flexo RoHS
7000 High-gloss for fine printing. Adheres well to
curved surfaces.
4.0
0.9
2.5
60# White High Gloss
320
43# Densified Kraft
60"
1668' Min.
Flexo UL*
RoHS
7000FL Same as 7000 with film liner. 4.0
0.9
1.5
60# White High Gloss
320
Polyester Film
54"
1668' Min.
Flexo RoHS
7050 High-gloss for fine printing. Adheres to LSE
plastics.
4.0
0.9
2.5
60# White High Gloss
700
43# Densified Kraft
13-1/2"
3000' Min.
Flexo RoHS
Litho
White
7014 Excellent flag resistance to small diameter
vials.
1.9
0.9
2.5
40# Coated Paper
320
43# Densified Kraft
60"
1668' Min.
Flexo RoHS
7109 Ideal to adhere to wet or damp surfaces.
Meets TAPPI #213 spec for repulpability. Not
recommended for use with water-based inks.
3.1
0.9
2.5
60# Coated Paper
1100
43# Densified Kraft
13-1/2" x
2500' Min.
Flexo RoHS
7113 Ideal for data-processing applications. Can be
cleanly removed and repositioned on most
surfaces.
4.0
0.4
3.2
46# Uncoated Paper
1000
50# Densified Kraft
48"
1668' Min.
Flexo RoHS
7142 Good thermal transfer printable facestock.
Can be removed cleanly or repositioned on
most substrates.
3.5
0.4
2.5
55# Coated Paper
1000
40# Kraft Glassine
48"
1668' Min.
Flexo, TT RoHS
Litho Tamper-
Indicating
White
7011 Excellent flag resistance on small diameter
vials. Used for unit dose pharmaceutical
packages.
2.3
0.9
2.5
32# Coated Paper
320
43# Densified Kraft
60"
1668' Min.
Flexo RoHS
7110 Readily fractures or delaminates. Ideal for
tamper-resistant labeling. Provides write-on
capability.
2.8
1.1
2.5
40# Uncoated Paper
320
43# Densified Kraft
60"
1668' Min.
Flexo UL*
RoHS
Saturated
Latex
Impregnated
White
7120 Conforms to curved surfaces. Resists staining
and moisture. Adheres to many textured
surfaces.
3.5
1.3
2.5
60# Semi-gloss White Paper
320
43# Densified Kraft
54"
1668' Min.
Flexo RoHS
* Can be used to display the UL listing mark, but each case must be reviewed and approved by UL follow-up services before use.
61