User Guide

99
BONDING
TAPES
PERFORMANCE
LABEL
MATERIALS
COMMERCIAL
GRAPHICS
RELEASE
LINERS AND
PRINTABLE
FILMS
SINGLE COATED
TAPES
RECLOSABLE
FASTENERS
SPECIALTY
PRODUCTS
FLEXOGRAPHIC
MOUNTING
Note: This technical information and data should be considered representative or typical only and should not be used for specification purposes.
3M
™
EMI Shielding and Electrical Tapes
Backing Product Typical Performance Characteristics Total Adhesive Master Size Specs
Material Thickness Type
(mils)
1 Excellent handling properties, high dielectric strength, 3.5 Acrylic 23.75" x 100 yd UL
solvent and flagging resistant; for use as an outer wrap
on wrap and fill capacitors, coil cover, interlayer insulation
and wire harness. Printable.
10 Thermosetting, flame retardant, no liner. Tough, conformable, 5.0 Rubber 15.5" x 100 yd UL
resistant to solder damage, puncture resistant, good electrical
properties, good handling properties. For use as coil cover, anchor,
harnessing, banding and as core, layer and crossover insulation.
20 Reinforced, white acrylic adhesive, flame retardant, no liner, printable. 5.0 Acrylic 15.5" x 100 yd UL
AL-10S Softened aluminum foil with flame-retardant film on one side. 7.8 none 18.5" x 27.25 yd UL
Excellent EMI shielding for PCBs and assemblies. Lightweight,
flexible and easily die-cut.
AL-1010S Same as AL-10S. 13.8 none 18.5" x 27.25 yd UL
CU-10S Softened copper foil with flame-retardant film on one side. 6.7 none 18.5" x 27.25 yd UL
Excellent EMI shielding for PCBs and assemblies.
Lightweight, flexible and easily die-cut.
CU-1010S 11.8 none 18.5" x 27.25 yd
27 Rubber adhesive, thermosetting, printable, no liner. 7.0 Rubber 24.5" x 100 yd UL
Edge-tear resistant, conformable, abrasion resistant.
69 Silicone adhesive, thermosetting, printable, no liner. 7.0 Silicone 23.75" x 100 yd UL
Edge-tear resistant, conformable, high temp flame-retardant adhesive.
79 Edge-tear resistant, conformable, solvent-resistant. For use as 7.0 Acrylic 24.25" x 100 yd
coil cover, anchor, and as core, layer and crossover insulation. Printable.
2191FR Lightweight, conformable, oxidation-resistant and high 5.5 Acrylic conductive 19.68" x 21.8 yd UL
strength for EMI shielding and grounding. Easily die-cut.
AG-2300 Same as 2191FR. 4.3 Acrylic conductive 39.37" x 54.5 yd
AU-2190 Same as 2191FR. 4.3 Acrylic conductive 27.55" x 27.25 yd
CN-3190 Same as 2191FR. 7.0 Acrylic conductive 41.3" x 54.5 yd
X-7001 Typically used to bond two surfaces both physically and electrically. 4.3 Acrylic conductive 10.24" x 10.9 yd
Can also provide EMI shielding, static charge draining and grounding.
92 Tough, thin, puncture-resistant film designed for high-temperature 3.0 Silicone 12.5" x 100 yd UL
application. For insulating and motor applications.
1093 2.5 Silicone 16" x 36 yd UL
1205 Solvent-resistant, tough, thin, puncture-resistant film designed for 3.0 Acrylic 12.5" x 100 yd UL
high-temperature applications. Good cover layer for flexible
circuits and for insulating applications.
1206 2.2 Acrylic 16" x 36 yd UL
Epoxy Film
Epoxy Film /
Aluminum Foil
Epoxy Film /
Copper Foil
Glass Cloth
Metallized ClothPolyimide Film