User Guide

100
BONDING
TAPES
PERFORMANCE
LABEL
MATERIALS
COMMERCIAL
GRAPHICS
RELEASE
LINERS AND
PRINTABLE
FILMS
SINGLE COATED
TAPES
RECLOSABLE
FASTENERS
SPECIALTY
PRODUCTS
FLEXOGRAPHIC
MOUNTING
Note: This technical information and data should be considered representative or typical only and should not be used for specification purposes.
3M
™
EMI Shielding and Electrical Tapes
Backing Product Typical Performance Characteristics Total Adhesive Master Size Specs
Material Thickness Type
(mils)
5 Clear, acrylic adhesive, no liner. Solvent-resistant for use in 2.5 Acrylic 24" x 100 yd UL
coil and capacitor holding applications.
44 Reinforced mat, rubber adhesive. Thermosetting, no liner. 5.5 Rubber 23.5" x 100 yd UL
54 Rubber adhesive, thermosetting, no liner. Used in fine wire coils 2.5 Rubber 22.5" x 100 yd UL
where magnet wire serves to color code.
55 Thermosetting, no liner. Edge-tear, puncture and abrasion resistant 7.5 Rubber 23.5" x 100 yd UL
for use as coil cover, lead pad and core, layer and crossover insulation.
56 Thermosetting, no liner. For use as layer insulation 2.3 Rubber 15.5" x 100 yd UL
and coil cover in 130 F applications.
57 Thermosetting, no liner. Use as a coil cover, layer insulation and 3.3 Rubber 24" x 100 yd UL
capacitor wrap where higher electrical strength is desirable.
58 Use as a coil cover, layer insulation and capacitor wrap 3.3 Rubber 15.5" x 100 yd UL
where higher electrical strength is desirable.
74 Conformable. Provides good electrical strength for 0.8 Rubber 15.5" x 100 yd UL
coil applications where space is at a premium.
75 Thermosetting, linered. For use in bonding applications 3.8 Rubber 15.5" x 100 yd UL
requiring a positive insulation barrier.
1318-1 1-mil film; excellent flagging and solvent resistance. For use as an 2.5 Acrylic 24" x 100 yd UL
outer wrap on capacitors and coils; printable.
Available in yellow, white and black.
1318-2 Same as 1318-1 but with 2-mil film. 3.3 Acrylic 24" x 100 yd UL
1350F-1 1-mil film with flame-retardant adhesive. Excellent flagging and. 2.5 Acrylic 24" x 100 yd UL
solvent resistance. For use as an outer wrap on capacitors
and coils;printable. Available in yellow, white and black
1350F-2 Same as 1350-1 but with 2-mil film. 3.3 Acrylic 24" x 100 yd UL
1350T-1 1.5-mil, triple-layer, polyester film with flame-retardant acrylic adhesive. 3.0 Acrylic 24" x 100 yd UL
Excellent flagging and solvent resistance, with good wet
grab and smooth, even unwind for use on automated equipment.
1351-1 1-mil film with flame-retardant acrylic adhesive. Excellent flagging and 2.5 Acrylic 24" x 100 yd UL
solvent resistance. For use as inner layer and outer wrap insulation
on coils. Smooth, even unwind for use on automatic equipment.
Available in yellow and white.
1351-2 Same as 1351-1 but with 2-mil film. 3.0 Acrylic 24" x 100 yd UL
1351T-1 Same as 1350T-1 but available in yellow and white. 3.0 Acrylic 24" x 100 yd UL
46 Good tensile strength and edge-tear resistance. 7.0 Rubber 23" x 100 yd UL
For use in end-turn taping.
1276 Solvent-resistant, high shear strength adhesive. Good tensile 9.0 Acrylic 23" x 100 yd
strength for holding in oil-filled transformer applications.
1339 Solvent-resistant, high shear strength adhesive. 6.5 Acrylic 23" x 100 yd UL
Good tensile strength and edge-tear resistance; for holding applications.
Polyester FilmPolyester Film/
Filament Reinforced