User Guide

101
BONDING
TAPES
PERFORMANCE
LABEL
MATERIALS
COMMERCIAL
GRAPHICS
RELEASE
LINERS AND
PRINTABLE
FILMS
SINGLE COATED
TAPES
RECLOSABLE
FASTENERS
SPECIALTY
PRODUCTS
FLEXOGRAPHIC
MOUNTING
3M
™
EMI Shielding and Electrical Tapes
Backing Product Typical Performance Characteristics Total Adhesive Master Size Specs
Material Thickness Type
(mils)
PaperPTFE FilmVinyl
Magnetic /
Polymer Film
Mesh and
Sleeving
Absorbing
Materials
12 For banding coils and for cover on bobbin-wound coils. 5.5 Rubber 23.25" x 100 yd
16 Conformable; for use as coil cover on bobbin-wound coils. 9.0 Rubber 23.25" x 100 yd
60 Thermosetting, no liner. Use on high temperature coils, 4.0 Silicone 13.5" x 100 yd UL
capacitors and wire harnesses.
61 Thicker version of 60. 7.0 Silicone 13.5" x 100 yd UL
62 Thermosetting, printable. Better bonding of resins and varnishes. 4.0 Silicone 13.5" x 100 yd UL
63 Solvent-resistant adhesive for use where chemical properties are 3.5 Acrylic 13.5" x 100 yd UL
more important than temperature resistance. No liner.
22 Heavy-duty insulation designed for general purpose use where greater 10.0 Rubber N/A UL
mechanical strength and abrasion resistance are required.
33 Provides moisture-tight electrical and mechanical protection; 7.0 Rubber N/A UL
good resistance to abrasion, moisture, alkalis, acids and varying
weather conditions (including ultraviolet exposure).
33+ All-weather vinyl insulating tape; conformable for cold weather 7.0 Rubber N/A UL
applications. Excellent resistance to abrasion, moisture, alkalis,
acids, UV rays and weather. Thicker for quicker buildup.
35 Color-coding tape available in 9 fade-resistant colors. 7.0 Rubber N/A UL
Abrasion and weather resistant. For use in phase identification,
color-coding leads and piping systems, and for marking safety areas.
Resistant to moisture, alkalis, acids and copper corrosion.
88 All-weather vinyl insulating tape. Conformable for 7.0 Rubber N/A UL
cold weather applications. Excellent resistance to abrasion,
moisture, alkalis, acids, and copper corrosion.
1710 Good quality, economical general purpose insulating tape. 7.0 Rubber N/A UL
Good resistance to abrasion, moisture, alkalis, acid, copper
corrosion and varying weather conditions (including ultraviolet).
1380 Excellent high magnetic shielding at low frequency. 11.8 Rubber 460mm x 610mm
Soft magnetic sheet sandwiched between layers of film. Thin,
flexible, lightweight and easily die-cut.
DS-5 EMI mesh sleeves for cables and harnesses. Excellent strain relief and 5.0 None 100M UL
heat stability, flexible, oxidation resistant. Solderable.
DS-7 7.0 None 100M
DS-10 10.0 None 100M
DS-14 14.0 None 100M
DS-ME 5.0 None 200M
DS-MG 7.0 None 200M
DS-MJ 10.0 None 200M
DS-MN 14.0 None 200M
FS-30 30.0 None 50M
FS-37 37.0 None 50M
FS-D30 30.0 None 50M
FS-D37 37.0 None 50M
AB2020 Silicone rubber with magnetic filler. EMI absorbing can .27mm Acrylic 300mm x 210mm
AB2025 suppress radiated noise in broadband frequency. .32mm Acrylic 300mm x 210mm
AB2050 .58mm Acrylic 300mm x 210mm
AB2080 .88mm Acrylic 300mm x 210mm
AB2100 1.08mm Acrylic 300mm x 210mm
AB2120 1.28mm Acrylic 300mm x 210mm
AB2150 1.58mm Acrylic 300mm x 210mm