Operation Manual

English

If your Camcorder Projector does not seem to be functioning properly, check the items below

before you contact an authorized service center.

Symptom Check Point

The Camcorder Projector

can’t be turned on.

• Ensure the battery is fully charged or the AC power adapter

is properly connected.

The projected image is

too dark.

• Use the Camcorder Projector in a darker environment.

• Project the image on a at, white surface.

• Decrease the size of projected image.

The projected image is

blurry.

• Adjust the focus. Please refer to “Adjusting the Focus”

section.

• Check if the lens is dirty.

• Replace with an image of higher resolution.

The image is not played.

• Ensure the image format is compatible.

• Replace with another le or memory card.

• Convert the le with the attached AMC software.

No image is projected

when an AV device is

connected.

• Ensure the connected device is equipped with AV-out

function.

• Check if the AV Cable is connected, and the Camcorder

Projector is switched to AV-in function.

• Check if the AV Cable is plugged in correctly.

The surface temperature

of the Camcorder

Projector feels warm.

It is normal for this Camcorder Projector to generate

moderate heat during normal operation.

Troubleshooting

3M™ Camcorder Projector CP45