Operation Manual

WARNING
To reduce the risk associated with re and explosion:
Do not immerse the Camcorder Projector in any liquid or allow it to get wet.
Use only 3M approved power supply provided.
Do not dispose of the Camcorder Projector by incineration or re.
Do not operate this Camcorder Projector in any environment above 35°C
(95°F).
Do not expose or store Camcorder Projector in direct sunlight, or excessive
heat (>60°C or 140°F) moist or caustic environments.
To reduce the risks associated with driver distraction in a moving motor
vehicle:
Do not use this Camcorder Projector in a moving motor vehicle.
To reduce the risk associated with re and explosion, battery leakage or
overheating:
Do not immerse the Camcorder Projector in water or allow it to get wet.
Use only the 3M specied wall charger.
Do not use the Camcorder Projector if it gives off an odor, or generates
excessive heat.
Keep away from exposed ames if the Camcorder Projector leaks liquid or
emits an odor.
Flush the eyes with water and seek medical attention if the Camcorder
Projector leaks liquid and the battery electrolyte gets in the eyes.
To reduce the risks associated with choking:
Keep the Camcorder Projector, the microSD card and other small parts away
from young children.
CAUTION
To reduce the risk associated with environmental contamination:
Dispose of all system components in accordance with applicable government
regulations.
To reduce the risks associated with bright LED ash light:
Do not stare directly into the projector lens.
To reduce the risks associated with tripping and falling:
Position the charging cord and data cables so that they can not be tripped over.
To reduce the risks associated with hearing loss:
Be sure to read earphone manufacturer’s instructions with respect to volume
level.
User is responsible to set a safe volume level.
© 3M 2011. All Rights Reserved.
3M™ Camcorder Projector CP45