Operation Manual

3
English
1
Connect one end of the supplied AC adapter to the USB
port of the Camcorder Projector and the other end to a
wall outlet.
OR
Connect one end of the supplied USB cable to the USB
port of the Camcorder Projector and the other end to
a powered PC. Note: The Camcorder Projector power
switch must be Off to charge the battery.
2
The Power LED turns orange and the charging starts.
3
When the Power LED turns green, the battery is fully charged.
Charging Method Charging time
Camcorder Projector power switch Off,
connected to AC adapter
4 hours approximately
Camcorder Projector power switch Off,
connected to computer with USB cable
7 hours approximately
Camcorder Projector power switch On with AC
adapter or USB cable connected
no charging
Reading LED indicators
LED Indicator Description
Solid Orange Camcorder Projector is charging
Solid Green When AC power adapter is connected and the Camcorder
Projector is in standby mode. Also indicates a fully charged
battery
Solid Blue Camcorder Projector is ON
Blinking Blue Camcorder Projector is performing le transfer
Charging the Battery
© 3M 2011. All Rights Reserved.
3M™ Camcorder Projector CP45