User Guide

3M EH-Series Tapes combine the
air release of 3M E-Series Tapes
with adhesive that resists edge
lifting on small diameter cylinders.
These ten tapes provide production
enhancements for printers plus
the print quality customers expect.
On easy with reduced
air entrapment
• Unlike flat or pebbled liners,
crosshatched microchannels
in EH-Series liners allow air
to bleed from between the tape
and plate, and between the tape
and cylinder
• Helps eliminate bubble problems
for easier, virtually error-free
mounting
• Setup is faster with smoother
surfaces for cleaner print quality
and higher productivity
Stays on with reduced
edge-lifting
• Exclusive adhesive maintains
tight contact between tape and
plate to dramatically reduce
edge lifting
• Saves prep, downtime, and
labor of sealing plate edges
• Prevent blemishes in screen
and process printing
• Help assure proper registration
Balancing solids and dots for
customer satisfaction
• Choice of constructions for solids
or halftones, or combination
solids and dots
Cushion-Mount
™
Plus Tapes
with EH-Series Adhesive
1
2
Easy Mount
Adhesive that
holds the edge
on cylinder
diameters as
small as 2"
Select EH-Series
E1820H, E1815H, E1720H, E1715H,
E1020H, E1015H, E1920H, E1915H,
E1120H, E1115H:
• Higher plate side adhesion
• Small diameter print cylinder
• 0.107" thick plate or greater
• Don’t have time to clean back
of plate
Select E-Series
E1820, E1815, E1720, E1715,
E1020, E1015, E1920, E1915,
E1120, E1115:
• Easier plate removal
• Larger diameter print cylinder
• 0.067" thick plate or less
• Clean back of plate
EH-Series and E-Series Selection Guide