3 DT-Series Data Communications and Coax Cable Detection Instruments One-person mapping, testing and troubleshooting of data communications lines, phone wiring and coaxial cable
A professional test on every cable, every time. Get four jobs done with just one unit! The complicated work of today’s installer/network repair technician requires precise, accurate definition of cables and connectors...before and after installation. The 3M™ DT-Series of versatile hand-held detection instruments allows complete, one-person testing on low-voltage wiring applications.
M DT-2000 DataCom/Coax Circuit Tracer ™ The only UL-listed Datacom/Coax circuit tracer in the industry 3M DT-2000 DataCom/Coax Circuit Tracer is the first professional DataCom/Coax tester that provides the flexibility to test multiple cables/locations in easy, straightforward steps. The DT-2000 tester is made for professional installers and maintenance technicians. This unit allows for mapping, testing and troubleshooting of various lines.
3M™ DT-2000 DataCom/Coax Circuit Tracer Features Advantages Benefits Operates with a complete selection of up to 7 remote identifiers. Allows mapping of 7 circuits without moving Remote Identifiers. Can be used by CATV, Alarm, DataCom, Network Installers and Electrical Contractors performing low-voltage wiring applications. Saves time. Increases productivity. Saves money. Built-in RJ-11, RJ-45, F jacks. Allows testing of different unshielded wiring schemed telephone cable as well as COAX cable.
DT-2100 Remote Identifiers The 3M™ DT-2100 Remote Identifiers work as far-end termination modules with the 3M DT-2000. Each module has a unique electronic signature to ensure accurate mapping of individual circuits. The 3M DT-2000 works with up to 7 remote identifiers at once to identify specific cable connection locations.
3M DT-1000 Telecom Tester ™ For single office and home office applications. The only UL-listed Telecom/Coax circuit tracer in the industry The compact, hand-held 3M DT-1000 Telecom Tester quickly verifies the condition of wiring in patch cords and coaxial cables not installed through walls or bulkheads. The DT-1000 uses both lights and speech to identify opens, shorts and good cables. It can also identify if a patch cord is straight through or cross pinned.
3M DT-1000WT Wall Tester ™ The only UL-listed wall tester in the industry The 3M DT-1000WT Wall Tester conveniently plugs directly into an active telephone jack with either RJ-11 or RJ-45 modular jacks for instant visual verification of wiring configuration. High-intensity LEDs show wiring polarity and clearly indicate open, shorted or unused lines. With simple, one-jack operation, the UL-listed* DT-1000WT tests multiple wiring schemes including EIA/TIA-568 A and B, AT7T 258A and USOC 4.
3M™ DT Series Data Communications and Coax Cable Detection Instruments Product Number UPC Description DT-2000 55128-53007-6 Datacom/Coax Tracer DT-2100 55128-53008-3 Remote Identifiers DT-1000 55128-53009-0 Telecom/Coax tester DT-1000WT 55128-53011-3 Telephone Wall Tester DT-1000TWT 55128-53010-6 Telecom & Wall Line Tester In your business, power, technology and reliability are essential. 3M delivers that and more.
