Digital Media System 700 Series Operator and Product Safety Guide Guía para el operador Betriebsanleitung Guide de l’utilisateur ⱞ᛭ᱲ⧜ᤛ ꭲ녯ꯪꕋꯢ オペレーターズ ガイド Guida dell’operatore February 2007 • 78-6970-9469-2-B • Copyright © 2007, 3M Company. All Rights Reserved.
M™ Digital Media System 700 Series Contents Contents Introduction Safety Information INTENDED USE...........................................................................................................................................8 SAVE THESE INSTRUCTIONS ..................................................................................................................8 Trademarks ........................................................................................................................
Contents 3M™ Digital Media System 700 Series Maintenance ENGLISH Replacing Projection Lamp .........................................................................................................................32 3M™ Digital Media System 700 Bottom View............................................................................................32 Specifications Optical.......................................................................................................................................
3M™ Digital Media System 700 Series Introduction Introduction Thank You for Choosing 3M ENGLISH Thank you for choosing 3M equipment. This product has been produced in accordance with 3M’s quality and safety standards to provide smooth and trouble free use in the years to come. For optimum performance, please follow the operating instructions carefully. We hope you will enjoy using this high performance product in your home, meetings, presentations, and training sessions. © 3M 2007. All Rights Reserved.
3M™ Digital Media System 700 Series Introduction ENGLISH Safety Information Please read, understand, and follow all safety information contained in these instructions prior to the use of this 3M™ Digital Media System 700 Series. Retain these instructions for future reference. 3M™ Multimedia projectors are designed to operate in a normal office and home environment.
3M™ Digital Media System 700 Series Introduction D WARNING © 3M 2007. All Rights Reserved. ENGLISH • To reduce the risk associated with exposure to hazardous voltage: - Do not remove any screws other than those specified in the lamp replacement instructions. • To reduce the risk associated with hazardous voltage: - Do not operate this projector in wet environments or outdoors. - Do not modify this projector or power cord.
3M™ Digital Media System 700 Series Introduction ENGLISH D CAUTION • To reduce the risk associated with intense visible light: - Avoid looking directly into the projector lens while the lamp is on. • To reduce the risk associated with impact of a falling projector: - Use only the 3M brand wall/ceiling mounting hardware kit if wall or ceiling mounting is desired. - Installation of the 3M wall/ceiling kit must only be performed by qualified personnel.
3M™ Digital Media System 700 Series Introduction Warranty; Limited Remedy; Limited Liability The warranty for lamps that are included as original equipment in the projectors is for parts only and is effective for a period of 90 days after the date of purchase of the projector or 180 hours of lamp usage,whichever occurs first. Important: The above warranty shall be void if the customer fails to operate product in accordance with 3M’s written instructions.
3M™ Digital Media System 700 Series Introduction Shipping Contents ENGLISH Contents of Shipping Box The 3M™ Digital Media System 700 is shipped with the necessary cables required for standard VCR, PC or laptop computer connections. Carefully unpack and verify that you have all of the items shown below in Figure 1–1. If any of these items are missing, please contact your place of purchase. Note: A set of cables for connection to Apple Macintosh is available as an option.
3M™ Digital Media System 700 Series Introduction Keep Your Packing Materials Save the shipping box and packing materials in the event the Digital Media System 700 should require shipping to a 3M Service Center for repair. Use packing material to protect projector. Take a few minutes to review Section 2 to familiarize yourself with the Digital Media System 700 machine characteristics and then turn to Section 3 to set up the projector.
Product Description 3M™ Digital Media System 700 Series Product Description ENGLISH Benefits of Product The 3M™ Digital Media System 700 is designed to meet the needs of both home and business users. This easy to use unit utilizes the powerful features of 3M’s state of the art Vikuiti™ Super Close Projection (SCP) technology. SCP allows you to fully utilize the space available while still projecting a large, high quality image.
3M™ Digital Media System 700 Series Product Description Parts Identification List Lens 2. Remote Control Sensor 3. Built–In Speakers (stereo) 4. Height Adjustment Feet 5. Power Cord Connection 6. Input Terminals 7. Main Power Switch 8. Control Panel Keypad 9. 1 ENGLISH 1. 9 5 7 2 6 ™ Slot for Kensington Lock 10. DVD Player 8 11. USB Port 3 4 © 3M 2007. All Rights Reserved.
Connection 3M™ Digital Media System 700 Series Connection ENGLISH Projector Terminal Connections Control Panel • • • • • • • • • HDMI/In 3.5mm Mini Jack for PC Audio In and Out VGA In RCA L/R Audio In Composite Video In Mini Din 4-pin S-Video Input Min USB Power Switch Power Cord Connection Cable Connections 1. Turn off all power to the projector and input sources during cable hook up. 2. Connect cables being careful not to bend any pins in the cable plug or input terminal. 3.
3M™ Digital Media System 700 Series Connection Digital Media System 700 Setup ENGLISH SPr/Cr Pb/Cb Video Y S-Video In HDMI In VGA In Audio In COMPUTER COMPUTADOR / ORDINATEUR / CALCOLATORE COMPUTADORA / DATOR / ৼࢫା֬৯ / ᇖዧሽ Min USB RS232 Coaxial In Coaxial Out AC VIDEO S-VIDEO HDMI © 3M 2007. All Rights Reserved.
3M™ Digital Media System 700 Series Projector Remote Control Remote Control Functions ENGLISH Aim the remote control toward the projection screen or at the sensor. Press desired remote button to send a signal to the projector. / Subtitle / Power: Power ON/OFF Projector Input: Select computer or video inputs Blank: Removes projected image, white background. Press again to return projection image. Freeze: Store (freeze) the projected image.
3M™ Digital Media System 700 Series Projector Remote Control Remote Control Notes ATTENTION • Do not get the remote control wet or place it on wet objects. Doing so may result in malfunction. • Remove the batteries from the remote control and store them in a safe place if you won’t be using the remote control for an extended period. • Replace the batteries whenever the remote control starts to malfunction.
3M™ Digital Media System 700 Series Basic Operations Basic Operations ENGLISH Image Size (Projector-to-Screen Distance) To adjust the size of the projected image adjust the zoom control buttons and distance to the screen. Projection Screen Size (inches) Projector Distance From Screen (inches) 40" (101.6 cm) 19.8" (50.3 cm) 50" (127.0 cm) 24.8" (62.9 cm) 60" (152.4 cm) 29.7" (75.5 cm) 70" (177.8 cm) 34.7" (88.1 cm) 80" (203.2 cm) 39.6" (100.7 cm) 90" (228.6 cm) 44.6" (113.2 cm) 100" (254.
3M™ Digital Media System 700 Series Basic Operations Stand By Mode Note: The fan motor will continue to run for a few minutes until the projector cools down and then the fan will turn off. Start Up 1. Press the Standby button on Remote Control again to illuminate the lamp and project an image on the screen. Projector Power Down 1. 2. Press the Power button on Remote Control to place the projector in the standby mode (red and blue LED illuminates).
3M™ Digital Media System 700 Series ENGLISH Basic Operations Picture sub menu Action Description Picture Mode Picture modes are provided so the user can simply optimize the projector image set-up to suit his/her program type: 1) TV 2) Business 3) Cinema 4) Sports Brightness Adjusts the brightness of the image. The higher the setting, the brighter the image. The lower the setting, the darker the image. Contrast Adjusts the degree of difference between the dark and light in the image.
3M™ Digital Media System 700 Series Basic Operations Adjusts the amount of noise reduction to be applied to the image. There are 4 settings: 1) Off 2) Low 3) Medium 4) High Aspect Ratio There are 4 Aspect Ratio settings: 1) Full Screen 2) Standard 3) Letter Box 4) Theatre-Wide(16:9) Advanced Allows the user to navigate into the advanced picture settings menu. Reset Resets values in this sub-menu only. ENGLISH Noise Reduction Table 1: Picture Sub Menu Function Description © 3M 2007.
3M™ Digital Media System 700 Series ENGLISH Basic Operations Picture "Advanced" Display sub menu Action Description Overscan Adjusts the amount of cropping of the Image boundaries. (On/Off) Change overscan from 90 to 100 percentile (in 1 degree increments) NSTC Mode Black Pedestal level 1) 0 IRE Pal, NSTC-JP 2) 7.5 IRE NSTC (Black-Level) S-video and Composite will set the Black Level automatically between 0 IRE for Pal and 7.5 IRE for NSTC.
3M™ Digital Media System 700 Series Basic Operations ENGLISH Input Display sub menu Action Description Main Input Allows the user to select which Input is to be displayed on the main channel: 1) 2) 3) 4) 5) 6) Audio Input VGA Component DVI-D DVI-A S-Video Composite Allows the user to select which Audio Input is to be processed: 1) 2) 3) 4) DVD HDMI Input SPDIF Input Analog Input Table 3: Input sub menu function description © 3M 2007. All Rights Reserved.
3M™ Digital Media System 700 Series ENGLISH Basic Operations PIP Display sub menu Action Description PIP Picture In Picture Allows the user to turn the PIP function On or Off.
3M™ Digital Media System 700 Series Basic Operations ENGLISH Audio Display sub menu Action Description Volume Allows User to adjust volume From 0 to 50. At 0 the sound is muted automatically. Bass Allows User to adjust bass From 0 to 10. Treble Allows User to adjust treble From 0 to 10. Mute For the User to turn the sound On and Off.
3M™ Digital Media System 700 Series ENGLISH Basic Operations Setup Display sub menu Action Description Language Allows the user to select the Menu language: 1) English 6) Portugese 2) French 7) Japanese 3) Spanish 8) Mandarin Traditional 4) Deutsch 9) Mandarin Simplified 5) Italiano Sleep Powers down unit in: 1) 5 mins 2) 10 mins 3) 15 mins 4) 20 mins 5) 30 mins 6) 45 mins 7) 60 mins H-Keystone Horizontal Keystone adjustment (±30) V-Keystone Vertical Keystone adjustment ( ±20) Reset Lamp hrs
3M™ Digital Media System 700 Series Basic Operations ENGLISH Status Display sub menu 2006. All Rights Reserved. © 3M 2007.
3M™ Digital Media System 700 Series Troubleshooting Troubleshooting ENGLISH Error Messages When the unit’s power is ON, messages such as those shown below may be displayed. When any such message is displayed on the screen, please respond as described below. If the same message is displayed after the treatment, or if a message other than the following appears, please contact your dealer or service company. Message Description CHANGE THE LAMP AFTER REPLACING LAMP, RESET THE LAMP TIMER.
3M™ Digital Media System 700 Series Troubleshooting Troubleshooting (continued) Indicator Lamps Lighting and flashing of the power indicator, the lamp indicator, and the temp indicator have the meanings as described in the table below. Please respond in accordance with the instructions within the table. If the same indication is displayed after the treatment, or if an indication other than the following is displayed, please contact your dealer or service company.
3M™ Digital Media System 700 Series ENGLISH Troubleshooting Lighting or blinking in red Turned off Lighting or blinking in red Turned off Lighting in green Turned off Lighting in green Turned off 30 Blinking in red The cooling fan is not operating. Turn the power OFF and wait at least 20 minutes. After the unit has sufficiently cooled down, please make confirmation of the following item, and then reset the power to ON.
3M™ Digital Media System 700 Series Troubleshooting Troubleshooting (continued) Audio and Image Issues ENGLISH Before requesting repair, please check in accordance with the following chart. If the situation cannot be corrected, then contact your dealer. Problem Cause / Solution The main power source is not ON. The electrical power cord is not plugged in. Power does not come ON. The main power source has been interrupted during operation, such as by a power outage (blackout), etc.
3M™ Digital Media System 700 Series Maintenance Maintenance ENGLISH Replacing Projection Lamp When the lamp’s total working time accumulates to over 2000 hours, the on-screen display (OSD) will deliver a message recommending that you replace the lamp. Please contact a service center to replace the lamp as soon as possible, or refer to the following instructions to replace it yourself. To replace the lamp: 1. Turn off the projector by pressing the “power” button on top of the unit. 2.
3M™ Digital Media System 700 Series Specifications Specifications Note: These specifications are subject to change without notice. ENGLISH Optical Resolution: Native, True XGA (1024 x 768) Imager: One panel 0.7" DLP projection system Aspect Ratio: 4:3 native and 16:9 supported Colors: 16.7 million true colors (24 bit) Brightness: 1500 ANSI lumens – optimal for Vikuiti™ Super Close Projection Contrast Ratio: 1300:1 Projection lens: Manually adjustable focus, 130% offset, F2.
Specifications 3M™ Digital Media System 700 Series ENGLISH Other Features • Front access input/output interface • Easy-to-read and operate control buttons and remote control • Adjustable feet for various platforms • Auto image synchronization • Automatically saves user adjustments • On-screen menu in 9 languages • Kensington Security Slot • Two IR receiver windows (front and rear) Dimensions 13.5" (W) x 12.7" (D) x 6.1" (H) 343.5mm (W) x 321.6mm (D) x 155.3mm (H) Weight 700: 9.9 lbs or 4.5kg 710: 10.
3M™ Digital Media System 700 Series Other Care Other Care In order to ensure the safe use of your projector, please have it cleaned and inspected by your local dealer about once every 2 years. Never try to care for the inside of the unit yourself. Doing so is dangerous. Caring For The Lens 1. Turn off the projector, and unplug the power cord. 2. Lightly wipe the lens with a commercially available lens-cleaning wipe. Do not touch the lens directly with your hand.
ENGLISH Important Notice All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use.
