User Guide

Process
Belt is cleaned with 3M
™
Citrus Base Cleaner or 3M
™
Citrus Base Adhesive Remover and allowed to dry. 12" or 22" 3M
TM
Performance Plus Duct Tape 8979 is applied the length of the tear and pressed down firmly into the texture. 3M
™
Adhesion
Promoter 86A is applied over the leading edge of the tape and ahead of the tape line, and allowed to dry. A 4" wide strip of
3M
™
Polyurethane Protective Tape 8641 is applied over the leading edge of the 8979 tape and onto the belt in front of the
leading edge. This tape is also pressed down firmly to the textured belt surface. Wait five minutes and resume operation.
Related Products
3M
™
Citrus Base Cleaner — For cleaning the conveyor belt prior to repair.
3M
™
Citrus Base Adhesive Remover — For cleaning the conveyor belt prior to repair.
3M
™
Adhesion Promoter 86A — Promotes faster ultimate adhesion of the tape.
3M
™
Polyurethane Protective Tape 8641— Applied over the leading edge of the duct tape.
SIC Code
451399 — Air Couriers
421599 — Courier Service, except by air
Key Decision Makers
Facilities Engineering Manager
Plant Engineering Supervisor
Industrial Business
Building 21-1W-10, 900 Bush Avenue
St. Paul, MN 55106
© 3M 2005
Printed in the USA
MROpdcb8979.pdf
To request additional product information or to arrange for sales assistance, call
1-800-362-3550.
Address correspondence to: 3M Industrial Business Customer
Response Center, Building 21-1W-10, 900 Bush Avenue, St. Paul, MN 55106. Our
fax number is 651-733-9175. In Canada,
phone: [phone]. In Puerto Rico,
phone: [phone]. In Mexico, phone: [phone].
Unless stated otherwise in 3M’s product literature, packaging inserts or product
packaging for individual products, 3M warrants that each 3M product meets the
applicable specifications at the time 3M ships the product. Individual products may
have additional or different warranties as stated on product literature, package inserts
or product packages. 3M MAKES NO OTHER WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE OR ANY IMPLIED WARRANTY ARISING OUT OF A COURSE OF
DEALING, CUSTOM OR USAGE OF TRADE. User is responsible for determining
whether the 3M product is fit for a particular purpose and suitable for user’s
application. If the 3M product is defective within the warranty period, your exclusive
remedy and 3M’s and seller’s sole obligation will be, at 3M’s option, to replace the
product or refund the purchase price.
Except where prohibited by law, 3M and seller will not be liable for any loss or
damage arising from the 3M product, whether direct, indirect, special, incidental, or
consequential, regardless of the legal theory asserted, including warranty, contract,
negligence, or strict liability.
All statements, technical information and recommendations contained in this
document are based upon tests or experience that 3M believes are reliable. However,
many factors beyond 3M’s control can affect the use and performance of a 3M
product in a particular application, including the conditions under which the product
is used and the time and environmental conditions in which the product is expected
to perform. Since these factors are uniquely within
the user’s knowledge and control,
it is essential that the user evaluate the 3M product to determine whether it is fit for a
particular purpose and suitable for the user’s method of application.
For Additional Information
Product Use
Warranty and
Limited Remedy
Limitation of Liability