User's Manual
Table Of Contents
- Introduction and Basics
- Introduction
- Safety Information
- Installing and Moving Sprite
- Safety
- External Machine Diagram
- Machine Specifications
- Contact Information
- Basic Operation
- Sample Placement
- Contact Information
- Components
- Main Screen
- Begin a New Scan Screen
- Scanning Screen
- Scan Review Screen
- Processing Setup Screen
- Results Screen
- _
- Locate a Scan Screen
- Background Processing Screen
- Utilities Screen
- System Sleep Button
- Touch screen Calibration Button
- System Shutdown Button
- Storage Device Management Button
- Network Configuration Button
- One Touch Scan Setup Button
- Submit Trouble Ticket Button
- Reset Processing Engine Button
- Reset System Board Service Button
- Reset X-ray Service Button
- Reset Scan Engine Button
- System Restart Button
- System Status Screen
- X-ray System Maintenance Screen
- Common Elements
- Technical Support
Introduction and Basics
Safety Features
Feature Name Description
"X-ray On"
Indicator Lights
Illuminating indicators located on
either side of the touch screen
that pulsate while X-rays are
being generated.
Operator
"E-Stop" Button
Located on the front of the
machine near the touch screen.
This button should be pressed
only in the event of an
emergency.
Cabinet Safety Symbols
Symbol Name Description
WARNING
Risk of
Danger -
Refer to
Manual
Located
adjacent to
the
accessory
power
outlets.
WARNING
Risk of
Shock
Located
adjacent to
the
accessory
power
outlets.
CAUTION
X-ray
Hazard
Located
adjacent to
each port
that
accesses the
X-ray source.
WARNING
Hazardous
Voltage
Located
wherever a
potential
electrical
hazard
exists.
CAUTION
X-ray
Hazard
(Canada)
Located
adjacent to
each port
that
accesses the
X-ray source.
7