User's Manual

Sprite User's Manual
14
Fixture/Phantom Placement
To begin a full imaging scan, place and secure your sample in the appropriate canister and on the
appropriate stage. To begin a system calibration or validation, place and secure a calibration
phantom on its corresponding stage. (A fixture/phantom is secured when it has been gently
turned until it locks into place. An Audible Announcement informs you the fixture/phantom is
secure.) Shut the cabinet door, tap Begin a New Scan, and choose the proper scanning options.
Notes
• If you cannot open the cabinet door, Sprite's interlock system is probably engaged. The
door will unlock when the X-rays are turned off. For more information, see Safety.
• If you need replacement canisters, stages or foam accessories, please contact technical
support.
• Do not insert flammable or explosive materials inside the Sprite cabinet.
• If you intend to scan liquids, they must be non-flammable and in a sealed container.
Contact Information
Sprite is a product of IMTEC, a 3M Company.
If you have any questions about Sprite and its capabilities or if you have encountered a problem,
please contact us for assistance.
Email: [e-mail]
Toll-Free
Phone:
800-879-9799
Note: Our toll-free telephone
numbers do not work from
outside of the United States
Phone: [phone]
Fax: [phone]
International
Phone:
001-505-661-3000
Address: IMTEC, a 3M Company
110 Eastgate Drive
Los Alamos, NM 87544