User's Manual

Sprite User's Manual
18
To find out about scheduling automatic conditioning and detector calibration, please see
Scheduled Maintenance in the X-ray System Maintenance component.
Messages
Messages appear in yellow text on the main screen under the main components. They indicate
the status of the system and what actions, if any, you must take before starting a scan.
Please refer to the following table for specific messages
Message Button Indicates
X-rays Need
Conditioning
Begin a New Scan,
One Touch Scan
Must begin the conditioning procedure by tapping the
X-ray System Maintenance button
Nothing To
Scan
Begin a New Scan,
One Touch Scan
Must place an item in the cabinet and be sure that the
RFID tag has been read
Not Ready To
Scan
Begin a New Scan,
One Touch Scan
The system is not ready to begin a scan
Too Many
Items
Begin a New Scan,
One Touch Scan
There is more than one item placed in the cabinet
Scan In
Progress
Begin a New Scan,
One Touch Scan
A scan is in progress and that a new scan cannot begin
until it finishes
No Available
Drives
Begin a New Scan,
One Touch Scan
The data drive(s) have not been assigned or may be
full
Reconstructing Begin a New Scan,
One Touch Scan
There is a current reconstruction running and that a
scan cannot begin until it finishes
Begin X-ray
Conditioning
X-ray System
Maintenance
Must tap this button and condition the X-rays before
starting a scan
Notes
• The trefoil indicates which buttons activate X-rays.
• Sprite also features audible announcements.