User's Manual
Table Of Contents
- Introduction and Basics
- Introduction
- Safety Information
- Installing and Moving Sprite
- Safety
- External Machine Diagram
- Machine Specifications
- Contact Information
- Basic Operation
- Sample Placement
- Contact Information
- Components
- Main Screen
- Begin a New Scan Screen
- Scanning Screen
- Scan Review Screen
- Processing Setup Screen
- Results Screen
- _
- Locate a Scan Screen
- Background Processing Screen
- Utilities Screen
- System Sleep Button
- Touch screen Calibration Button
- System Shutdown Button
- Storage Device Management Button
- Network Configuration Button
- One Touch Scan Setup Button
- Submit Trouble Ticket Button
- Reset Processing Engine Button
- Reset System Board Service Button
- Reset X-ray Service Button
- Reset Scan Engine Button
- System Restart Button
- System Status Screen
- X-ray System Maintenance Screen
- Common Elements
- Technical Support
Components
61
Common Elements
Abort Button
Tap the Abort button to stop a scan.
The button turns red, the X-rays turn off, and the scan stops.
To move away from the current screen (to begin another scan, for instance), use the navigation
buttons.
Arrow Button
To retrieve a scan or any of its reconstruction files, or calibration/validation report listed in the
ding row and the results display on the following
can Screen, the Scan Review Scan screen appears.
anipulation Buttons
ls allow you to view and manipulate preview (scout) or raw images. They include image
Larger and Smaller buttons), rotation, window width and level, panning and
Rotate
table, tap the arrow located in the correspon
page. If you tap the arrow on the Locate a S
If you tap the arrow on the Scan Review screen, the Results screen appears.
Image M
These too
size (i.e., the
zooming.
Tap the play (or arrow) button to see the scanned images as the stage rotates 360° from left to
right.
The position indicator moves along the slider as the rotation progresses or may be set to
view the image from a certain angle within the 360° rotation.