User's Manual
Table Of Contents
- Introduction and Basics
- Introduction
- Safety Information
- Installing and Moving Sprite
- Safety
- External Machine Diagram
- Machine Specifications
- Contact Information
- Basic Operation
- Sample Placement
- Contact Information
- Components
- Main Screen
- Begin a New Scan Screen
- Scanning Screen
- Scan Review Screen
- Processing Setup Screen
- Results Screen
- _
- Locate a Scan Screen
- Background Processing Screen
- Utilities Screen
- System Sleep Button
- Touch screen Calibration Button
- System Shutdown Button
- Storage Device Management Button
- Network Configuration Button
- One Touch Scan Setup Button
- Submit Trouble Ticket Button
- Reset Processing Engine Button
- Reset System Board Service Button
- Reset X-ray Service Button
- Reset Scan Engine Button
- System Restart Button
- System Status Screen
- X-ray System Maintenance Screen
- Common Elements
- Technical Support
Sprite User's Manual
62
To increase the speed of the rotation, tap the plus sign.
To decrease the speed of the rotation, tap the minus sign.
To stop the image in a specific "position", tap the Pause button.
Level
To adjust the contrast or the brightness of the image (also known as the window width
and window level, respectively), tap the Level button.
Touch the image on the screen and drag your finger left or right to adjust the contrast. Drag up or
down to adjust the brightness.
Zoom
To magnify a region on the image, tap the Zoom button.
Touch the image on the screen and drag your finger over the region you would like to magnify. A
red box appears over the area. When you take your finger off the screen the region becomes
magnified.
Pan
To move the image on the screen, tap the Pan button.
Touch the image on the screen and drag your finger in any direction to move the image. If you
have zoomed in on a region of interest, you may pan the object to see the area surrounding the
region.
Reset Image
To return to the original image after using the imaging techniques, tap the Reset Image
button.
Note: When level, pan, or zoom is activated, the respective button's outline turns green.
Navigation Buttons
Tap these buttons to move back to previous screens.