SDS

Large Hole Repair Compound 06/06/18
__________________________________________________________________________________________
Page 10 of 11
Reproductive toxicity
15.2. State Regulations
Contact 3M for more information.
California Proposition 65
Ingredient
C.A.S. No.
Listing
Carbon Black
1333-86-4
Carcinogen
Titanium Dioxide
13463-67-7
Carcinogen
15.3. Chemical Inventories
The components of this product are in compliance with the chemical notification requirements of TSCA.
Contact 3M for more information.
15.4. International Regulations
Contact 3M for more information.
This SDS has been prepared to meet the U.S. OSHA Hazard Communication Standard, 29 CFR 1910.1200.
SECTION 16: Other information
NFPA Hazard Classification
Health: 1 Flammability: 1 Instability: 0 Special Hazards: None
National Fire Protection Association (NFPA) hazard ratings are designed for use by emergency response personnel to address
the hazards that are presented by short-term, acute exposure to a material under conditions of fire, spill, or similar
emergencies. Hazard ratings are primarily based on the inherent physical and toxic properties of the material but also include
the toxic properties of combustion or decomposition products that are known to be generated in significant quantities.
HMIS Hazard Classification
Health: *1 Flammability: 1 Physical Hazard: 0 Personal Protection: X - See PPE section.
Hazardous Material Identification System (HMIS® IV) hazard ratings are designed to inform employees of chemical hazards
in the workplace. These ratings are based on the inherent properties of the material under expected conditions of normal use
and are not intended for use in emergency situations. HMIS® IV ratings are to be used with a fully implemented HMIS® IV
program. HMIS® is a registered mark of the American Coatings Association (ACA).
Document Group:
33-9578-7
Version Number:
4.00
Issue Date:
06/06/18
Supercedes Date:
03/09/18
DISCLAIMER: The information in this Safety Data Sheet (SDS) is believed to be correct as of the date issued.3MMAKES
NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR
USAGE OF TRADE.User is responsible for determining whether the3Mproduct is fit for a particular purpose and suitable for
user's method of use or application.Given the variety of factors that can affect the use and application of a3Mproduct, some of
which are uniquely within the user's knowledge and control,it is essential that the user evaluate the3Mproduct to determine
whether it is fit for a particular purpose and suitable for user's method of use or application.
3Mprovides information in electronic form as a service to its customers. Due to the remote possibility that electronic
transfer may have resulted in errors, omissions or alterations in this information,3Mmakes no representations as to its
completeness or accuracy. In addition, information obtained from a database may not be as current as the information in the
SDS available directly from3M