User Guide

Disposable, maintenance-free protection
3M
™
Half Facepiece Respirators 5000 Series Disposable
Reusable, economical protection
3M
™
Half Facepiece Respirators 6000 Series Reusable
Ordering Information
• Simple and convenient—minimal training required.
• Pre-assembled with permanently attached cartridges;
no maintenance necessary.
• Facepiece made from soft, lightweight thermoplastic
elastomer.
• Ideally suited for
– Intermittent respirator use
– Plant shutdowns and turnarounds
– Dirty applications where respirators wear out or
become difficult to clean in a short time
Ordering Information
Part Number Description
Standard Drop Down
6100 6100DD Half Facepiece, Small
6200 6200DD Half Facepiece, Medium
6300 6300DD Half Facepiece, Large
Available in three sizes and with a variety
of pre-assembled cartridges and filters.
Please call your sales representative for
ordering information.
• The economical choice to either keep or toss.
• Facepiece is made from soft, lightweight thermoplastic elastomer.
• Available with a standard or drop-down head harness option.
Drop-down model allows wearers to lower the respirator without
removing hardhat or faceshield.
• Head harness assembly and spare parts available.
Standard
Drop Down
Respirator Maintenance
Comfort Durability Versatility Facepiece Material Program
5000 Disposable Very Good Very Good Air Purifying Only Thermoplastic Elastomer Little or None
6000 Reusable Very Good Very Good 3 System Configurations Thermoplastic Elastomer Limited or Ongoing
7500 Ultimate Reusable Excellent Excellent 3 System Configurations Silicone Ongoing
Which 3M half facepiece respirator is right for you?
The 5000 series has permanently attached cartridges, but the 6000 and 7500 series use interchangeable cartridges/filters,
making standardization simple and cost-effective.
4
15
14
5
16