Drawing

3M™
Medium-Wall Heat Shrink Tubing IMCSN
4 of 5









Maintenance
3M™ Medium-Wall Heat Shrink Tubing IMCSN is not impaired by freezing or overheating
due to ambient temperature found in storage or shipping. Normal
storage and stock rotation
are recommended.
Installation
Techniques
Exact instructions are available on a separate sheet. The following is a summary of
instructions:
1. Thoroughly clean and prepare cable.
2. Cut 3M IMCSN tubing to required size, per instructions.
3. Slide 3M IMCSN tubing onto cable.
4. Install connector, if applicable.
5. Center tubing.
6. Shrink tubing from center.
7. Heat until tubing is completely shrunk and adhesive/sealant (if applicable) is
squeezed from ends.
Availability
3M IMCSN tubing is available from your electrical distributor.