User Guide

Product LC-1112 LC-1113 LC-1211 LC-1212 LC-1213 LC-1214
Cure Mechanism
UV UV Visible, UV Visible, UV Visible, UV Visible, UV
Cure Speed UV (sec)
1
<0.5 <0.5 <0.5 <0.5 <0.5 <0.5
Cure Speed, Visible (sec)
2
NA NA <5 2 2 <5
Typical Uncured
Properties
Base Resin
Acrylate Acrylate Acrylate Acrylate Acrylate Acrylate
Color
Colorless Colorless Light Yellow Light Yellow Light Yellow Red
Specific Gravity
1.14 1.13 1.13 1.14 1.13 1.05
Viscosity @72°F (cP)
3
15,460 641 488 12,720 560 44,000
Typical Cured Properties
Color
Colorless Colorless Light Yellow Light Yellow Light Yellow Yellow
Shore D Hardness
4
83 71 69 83 69 40
Tensile Strength (psi)
5
4600 2377 1426 4508 1929 1320
Elongation (%)
5
17 57 55 15 44 219
2 lb Dead Lead Heat
Resistance (°F/°C)
>300/149 >300/149 >300/149 >300/149 >300/149 >300/149
Overlap Shear Strength,
PC-PC (psi)
6
411 522 436 455 566 540
Max Cure Depth UV (in)
7
Max Cure Depth Visible (in)
8
0.69
NA
0.56
NA
0.94
2.52
>1.00
2.06
0.78
3.656
0.42
0.65
Comments
Semi-rigid bond.
Passes 3M
corrosion test
on copper and
aluminum.
9
Flexible bond.
Improved glass and
metal adhesion.
Passes 3M
corrosion test
on copper and
aluminum.
9
Flexible bond.
Passes 3M
corrosion test
on copper and
aluminum.
9
Semi-rigid
bond.
Improved
glass and
metal
adhesion.
Flexible bond.
Improved glass
and metal
adhesion.
Very flexible
bond. Color
change indicator
(red to light
yellow).
Can’t find what
you need?
Custom-made formulations
within the range of properties
below are available to
meet specific application
requirements. Contact your
3M representative for details.
Fast, efficient and versatile solutions for tough bonding challenges
Red color of LC-1214 provides
visualization aid for positioning.
Before
After
By changing from red to yellow,
LC-1214 indicates full cure.
NA = Not Applicable
1
EFOS Ultracure 100ss Plus, 5 mil thickness
2
3M
™
Curing Light VL1, 5 mil thickness
3
Brookfield DV-I+, ASTM D 1084
4
ASTM D 2240
5
Based on ASTM D 638
9
3M corrosion test (non-bias): adhesive coated on metal-
sputtered PET film, cured, stored at 85°C/85% R.H. for
two weeks, inspected for corrosion.
6
ASTM D1002
7
Fusion D bulb
8
3M Curing Light VL1
*Note: The technical information and data on this page should be considered representative or typical only, and should not be used for specification purposes.
Viscosity (cps) 300-35,000
Shore D Hardness 30-80
Elongation % 20-180
OLSS PC-PC (psi) 400-750
OLSS Acrylic-Acrylic (psi) 400-550
3M
™
Light Cure Adhesives