User's Manual

14 75-0500-4450-4 C, 060-A
Startup Procedure
To apply power to the Digital Staff
Workstation:
§ Move the On/Off switch located on the front
of the cabinet to the On position. (Figure
6).
Only 3M-trained service technicians
should remove the cover of the unit.
Standard Configuration
§ The main user interface appears on the
screen after you apply power to the Digital
Staff Workstation. The software will take a
few seconds to load.
Local Configuration
§ The Companion user interface appears on
the screen after you apply power to the
Digital Staff Workstation. The software will
take a few seconds to load.
Remote Configuration
§ Make sure the KVM switch is set to the
library computer.
§ Double-click on the desktop to start
the Companion user interface (UI). The
Companion UI can also be set to start
automatically.
Figure 6: Digital Staff Workstation cabinet
On/off
switch