User's Manual

75-0500-4450-4 C, 060-A 33
Send ID Only (if enabled)
To send item IDs to the library circulation system:
1 Go into Check-in or Check-out mode.
For the Standard configuration:
§ Select the button or the button.
§ Select the (Security) button to turn OFF the security
function. This will turn ON the Send ID Only function. Follow the
instructions on the screen.
For Local and Remote configurations with the Companion UI:
§ Click Send ID in the Operations menu and
follow the instructions on the screen.
Companion UI - Operation menu
2 Place an item on the deck within the designated area. The item should
be:
§ touching the back wall (for books, the spine should be touching the
back wall),
§ within or inside of the edge sensors on the deck, and
§ covering two adjacent non-edge sensors (sensors that are next to each
other).
3 Position the item until the digital identification tag is read or the bar code
is under the scan line.
4 When the bar code is scanned or the digital tag is read, you will hear a
confirmation sound, which indicates that the item ID was sent to the
library's circulation system.
The icon on the Security button changes depending on whether
Check-in or Check-out is selected.