User's Manual

34 75-0500-4450-4 C, 060-A
Number of Items (if enabled)
To select the number of items to process at one time
For the Standard configuration:
Select the appropriate item number button:
§ (to process one item)
§ (to process two items)
§ (to process three items)
For Local and Remote configurations with the Companion UI:
§ Click the desired number of items in the
Items menu. The number will appear in the
menu bar next to Items.
The factory default setting is one item at a
time with no number of items buttons
appearing on the Staff screen. The library
Administrator can adjust the total number
of items to process at one time, as well as
which buttons will display (if any).
Companion UI - Item menu
Verify
The verifier detects when an item with a secured security strip is placed on
the workstation. When the verifier detects a secured security strip in an item,
a green light located on the back wall of the workstation deck is turned ON.
Otherwise, the green light is OFF.
To turn verify functions on and off:
For the Standard configuration:
Select or de-select the button. This will turn the Verify function
ON or OFF.
For Local and Remote Configurations:
§ Click On or Off in the Verify menu. The
selection will appear in the menu bar next to
Verify.
The factory default setting for Verify is User
Choice - ON. This means the Verify
function is ON by default and you are
allowed to turn the function ON or OFF.
The library Administrator can configure the
Verify function through administrative
settings to be ON or OFF by default,
without user choice. In this case, neither
the button, nor the Verify
menu appear on the Standard, or Local
and Remote configurations.
Companion UI - Verify menu