User's Manual

16
Performing general maintenance
Replacing the receipt printer paper roll
Use the following steps to replace a roll of printer paper on the Smart Check
System. Note that the printer paper can be replaced when the system is
running. The Smart Check screen will display a message indicating that
receipts are unavailable to the Patron as the printer is in service.
1 Open the side door on the Smart
Check system.
CAUTION
To reduce the risks
associated with pinching
of hand, which, if not
avoided, may result in
minor or moderate
injury.
§ Keep hands away
from sliding printer
rail
2 Turn the locking knob to release
the slide mechanism and slide the
printer back for access.
§ If there is any remaining
paper left in the printer, it will
be automatically ejected.
3 Lift the latch on the side of the
printer spindle and open the
printer spindle door (Figure 1).
4 Remove the empty printer roll
from the spindle.
5 Place a new roll of printer paper
(part # ) on the printer spindle.
(See Error! Reference source
not found..)