Drawing

Scotchlok

™

Terminals

M8BC, M6BC, M4BC

Butt Connector, Non-Insulated, Brazed Seam

Data Sheet

Specifications

Wire Size: See Table Above

Barrel Seam: Brazed

Maximum Current: Same as Wire

Terminal Material: ETP Copper

Terminal Plating: Tin

Installation Information

UL Listed and CSA Certified for use on stranded copper

(AWG) wire only.

Strip away the end of wire insulation; 1/2 inch for 8

AWG, 9/16 inch for 6 AWG and 5/8 inch for 4 AWG.

Make the crimp in the proper station of a recommended

3M crimp tool: 3M TH-450 (for 8 and 6 AWG):

(T & B) WT-115A, Burndy MY29-3.

UNDERWRITERS

LABORATORIES

STANDARD NO. UL 486C

3M FILE NO. E23438

CANADIAN STANDARDS

ASSOCIATION

STANDARD NO. 22.2

NO. 0, 65

3M FILE NO. LR22190

Barrel Crimp (Required)

WARNING

Turn power off before installing or removing terminal. All electrical

work should be done according to appropriate electrical codes.

rebmuNtcudorP

egnaReriW

)GWA(L ssenkcihT

lerraB

htgneL

lerraB

.D.I

CB8M818.0050.083.0571.0

CB6M620.1050.074.0052.0

CB4M431.1570.035.0082.0

PAGE 1
Scotchlok™ Terminals L M8BC, M6BC, M4BC Butt Connector, Non-Insulated, Brazed Seam Data Sheet Product Number Wire Range (AWG) L Thickness Barrel Length Barrel I.D. M8BC 8 0.81 0.050 0.38 0.175 M6BC 6 1.02 0.050 0.47 0.250 M4BC 4 1.13 0.075 0.53 0.280 Installation Information WARNING UNDERWRITERS LABORATORIES STANDARD NO. UL 486C 3M FILE NO. E23438 CANADIAN STANDARDS ASSOCIATION STANDARD NO. 22.2 NO. 0, 65 3M FILE NO.
PAGE 2
Engineering Specification Crimp-type connectors shall, electrically and mechanically, connect permanently to the pre-stripped ends of two stranded copper wires. The non-insulated, brazed seam butt connector shall be tin-plated, annealed copper, having a double-length, round brazed seam barrel, with a center stop, sized for a specified (AWG) wire range (8, 6, 4).