Drawing

Electrical Products Division

6801 River Place Blvd.

Austin, TX 78726-9000

http://www.3M.com/elpd

Litho in USA.

IMPORTANT NOTICE

Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability

associated with such use.

Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture as of the date of

purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above,

your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except

where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special,

incidental or consequential regardless of the legal theory asserted.

Engineering Specification

Crimp-type connectors shall, electrically and mechanical-

ly, connect permanently to the pre-stripped ends of two

stranded copper wires.

The connector line shall offer barrel variations in wire

(AWG) size (8, 6, 4) and construction (non-insulated

brazed seam, vinyl insulated butted seam, nylon insulated

seamless, etc...). The connector line shall have regulatory

agency coverage (UL Listing, CSA Certification). The

connectors shall be marked with the wire range and man-

ufacturer’s symbol ().

The non-insulated, brazed seam butt connector shall be

tin-plated, annealed copper, having a double-length,

round brazed seam barrel, with a center stop, sized for a

specified (AWG) wire range (8, 6, 4).

3M and Scotchlok are trademarks of 3M.

is a trademark of Underwriters Laboratories.

is a trademark of Canadian Standards Association.