3M™ Constant Monitors WSMONITOR1, WSMONITOR 2, WSMONITOR3 User’s Guide WSMONITOR1 WSMONITOR2 WSMONITOR3
Table of Contents Section Page SAFETY INFORMATION....................................................................................3 Introduction............................................................................................................5 Installation..............................................................................................................6 Operation................................................................................................................
SAFETY INFORMATION Please read, understand, and follow all safety information contained in these instructions prior to the use of this 3M™ Constant Monitors WSMONITOR1, WSMONITOR 2, WSMONITOR3. Retain these instructions for future reference.
WARNING To reduce the risks associated with fire and explosion: •• Do not use in an explosive environment - monitor is not designed to be intrinsically safe. To reduce the risks associated with medical device malfunction: •• Persons with heart pacemaker devices should never use this monitor. To reduce the risks associated with hazardous voltage and fire: •• Use only the power supply provided by 3M and specified for the country of use.
Introduction •• •• •• •• Monitors can check up to two wrist strap systems and one work surface, depending on the model. Compatible with most standard wrist straps. Easy to use: Simply plug in the wrist strap. Easy to install: Attach the monitor boxes to the bench with included hardware, connect the mat and plug it in. Damage to electronic devices is caused by static electricity from people. Connecting people to ground directs static electricity away from devices.
3M™ Constant Monitors WSMONITOR1, WSMONITOR 2, WSMONITOR3 Installation Constant Monitor WSMONITOR1 1. Check that you have received all parts: monitor, power/ground adapter and two mounting screws. 2. Using the mounting screws, mount the monitor under the work bench. (Other suggested mounting locations include the bench top and under bench shelving.) 3. Plug the power/ground adapter into the back of the monitor and into a 3-prong 120VAC outlet.
3M™ Constant Monitor WSMONITOR2 1. Check that you have received all parts: monitor, power/ground adapter and two mounting screws. 2. Using the mounting screws, mount the monitor under the work bench. (Other suggested mounting locations include the bench top and under bench shelving.) 3. Plug the power/ground adapter into the back of the monitor and into a 3-prong 120VAC outlet.
3M™ Constant Monitor WSMONITOR3 1. Check that you have received all parts: monitor, remotes, four screws, power/ ground adapter, mat cord and industrial hook and loop. 2. Using the hook and loop, mount the monitor under the workbench shelf. 3. Mount the remotes to the work bench with screws. 4. Connect the monitor to the STACKJACK. 5. Remove a plastic cap from STACKJACK and snap it to the mat. 6. Connect the other mat snap to ground. (Cable not included.) 7.
Operation •• •• •• •• Place a wrist band on your wrist and plug the coiled cord banana plug into the monitor’s banana jack. The monitor will display a green light when a functional wrist strap with good skin contact is connected to the unit. The unit will sound an alarm and display a red light if the wrist strap becomes defective or if the person is not in contact with the band. Unplug the wrist strap coiled cord from the unit to stop the alarm.
Specifications Specifications Typical Value Monitor type Impedance - Single Wire Circuitry Solid-state, surface mount Alarm Audible and visual (LED) Trip Level 6.5-7.0 megohms Power 120VAC, 230VAC Adjustments None Required Calibration None Required. Test Module available. Item Code Size Weight Monitors WSMONITOR1 .90" H x 1.8" W x 1.3" D 1.2 oz. One wrist strap/person WSMONITOR2 1" H x 2.4" W x 2.3" D 1.6 oz. One wrist strap/person and work surface WSMONITOR3 1" H x 4" W x 2.
3M is a trademark of 3M Company. Important Notice All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use.
