Cut Sheet

ManualsBrands3M ManualsConnectorsFemale - Nylon-Insulated, WR: 12 - 10, Stud Size: 1/4

Scotchlok

™

Terminals

MNI18-250DFI, MNI14-250DFI,

MNI10-250DFI

Female Disconnect, Interlock Barrel,

Nylon Fully Insulated

Data Sheet

Specifications

Wire Size: See Table Above

Barrel Seam: Interlock

Maximum Voltage Rating: 600 V Building Wire

1000 V Signs or

Fixtures (Luminaires)

Maximum Operating Temp: 221˚F (105˚C)

Maximum Current: Same as Wire

Insulator Material: Nylon

Terminal Material: Brass

Plating: Tin

Installation Information

UL Listed and CSA Certified for use on stranded copper

(AWG) wire only.

Strip away the end 3/8 inch of wire insulation.

Make the crimp in the proper station of a recommended

3M crimp tool: TH-440, TH-450 (scissor style), or TR-

490 (ratchet style) hand tools.

Suitable for factory installation on steel or brass tabs, UL

and CSA.

Suitable for field application on brass tabs, strain relief is

required, UL only.

W´

UNDERWRITERS

LABORATORIES

STANDARD NO. UL 310

3M FILE NO. E70512

CANADIAN STANDARDS

ASSOCIATION

STANDARD NO. 22.2

NO. 153

3M FILE NO. LR22190

WARNING

Turn power off before installing or removing terminal. All electrical

work should be done according to appropriate electrical codes.

Barrel Crimp (Electrical)

tcudorP

rebmuN

eriW

egnaR

)GWA(

htiwsetaM

baTelaM

)´W(htdiW

ssenkcihTxL

lerraB

htgneL

lerraB

.D.I

mumixaM

noitalusnI

retemaiD

IFD052-81INM81-22230.0x052.019.052.0670.0541.0

IFD052-41INM41-61230.0x052.019.052.0670.0541.0

IFD052-01INM01-21230.0x052.099.052.0821.0052.0

Summary of content (2 pages)

PAGE 1
Scotchlok™ Terminals MNI18-250DFI, MNI14-250DFI, MNI10-250DFI W´ Female Disconnect, Interlock Barrel, Nylon Fully Insulated L Data Sheet Product Number Wire Range (AWG) Mates with Male Tab Width (W´ ) x Thickness MNI18-250DFI 22-18 MNI14-250DFI MNI10-250DFI L Barrel Length Barrel I.D. Maximum Insulation Diameter 0.250 x 0.032 0.91 0.25 0.076 0.145 16-14 0.250 x 0.032 0.91 0.25 0.076 0.145 12-10 0.250 x 0.032 0.99 0.25 0.128 0.
PAGE 2
Engineering Specification Crimp-Type Female Disconnect shall, electrically and mechanically, connect permanently to a prestripped end of a stranded copper wire: and have a tongue portion with fingers which grip a Male Disconnect in a separable, reusable manner, forming a Quick Connect Wiring Termination. The connector line shall offer tongue variations (sized to 0.250˝ x 0.032˝ or 0.187˝ x 0.