User Guide

Additional Product Information
SIC Code
1796 – Installation Building Equipment
3534 – Elevators and Moving Stairways
Key Decision Makers
Design Engineers, Building Maintenance Supervisors
Adhesive
Acrylic
Acrylic
(A-10)
Product
Number
4936
4941
F9473PC
Thickness
0.025”
(0.64 mm)
0.045”
(1.1 mm)
0.045”
(1.1 mm)
Description
Dark gray, closed-cell
acrylic foam carrier.
Conformable. Good
adhesion to many painted
metals. Plasticizer resistant.
UL Listing 746C.
Clear adhesive transfer tape.
Features high shear strength
adhesive. UL Listing 746C.
Temperature
Resistance
Min/Hrs
300° F
(149° C)
500° F
(260° C)
Days/Wks
200° F
(93° C)
300° F
(149° C)
Relative
Adhesion
Shear
Very
High
Very
High
Peel
Very
High
Very
High
Solvent
Resistance
Very High
Very High
Note: This technical information and data provided here should be considered representative or typical only, and should not be used for specification purposes.
Industrial Business
Building 21-1W-10, 900 Bush Avenue
St. Paul, MN 55144
“VHB” is a trademark of 3M
Printed in USA
trim.pdf
© 3M 2005
For Additional Information
To request additional product information or to arrange for sales assistance, call
1-800-362-3550. Address correspondence to: 3M Industrial Business Customer
Response Center, Building 21-1W-10, 900 Bush Avenue, St. Paul, MN 55144. Our
fax number is 651-778-4244. In Canada, phone: [phone]. In Puerto Rico,
phone: [phone]. In Mexico, phone: [phone].
Important Notice
User is responsible for determining whether the 3M product is fit for a particular
purpose and suitable for user’s method of application. Please remember that many
factors can affect the use and performance of a 3M product in a particular application.
The materials to be bonded with the product, the surface preparation of those
materials, the product selected for use, the conditions in which the product is used,
and the time and environmental conditions in which the product is expected to
perform are among the many factors that can affect the use and performance of a 3M
product. Given the variety of factors that can affect the use and performance of a 3M
product, some of which are uniquely within the user’s knowledge and control, it is
essential that the user evaluate the 3M product to determine whether it is fit for a
particular purpose and suitable for the user’s application.
Limitation of Remedies
and Liability
If the 3M
™
VHB
™
Tape is proved to be defective within the warranty period stated
above, THE EXCLUSIVE REMEDY, AT 3M’S OPTION, SHALL BE TO REFUND
THE PURCHASE PRICE OF OR TO REPAIR OR REPLACE THE DEFECTIVE
3M
™
VHB
™
TAPE. 3M shall not otherwise be liable for any loss or damages, whether
direct, indirect, special, incidental, or consequential, regardless of the legal theory
asserted, including, but not limited to, contract, negligence, warranty, or strict liability.
Limited Warranty
3M warrants for 24 months from the date of manufacture that 3M
™
VHB
™
Tape will
be free of defects in material and manufacture. 3M MAKES NO OTHER
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO,
ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. This warranty does not cover damage resulting from the
use or inability to use 3M
™
VHB
™
Tape due to misuse, workmanship in application,
or application or storage not in accordance with 3M recommended procedures.