User’s Manual
3M™ Mobile Projector MP410 Safety Instructions...........................................................................................................4 Important Notice..................................................................................................................... 4 Technical Support Contact..................................................................................................... 4 Intended Use Statement.....................................................................
English 3M™ Mobile Projector MP410 Language................................................................................................................. 25 Source...................................................................................................................... 26 Video Mode.............................................................................................................. 27 Audio..............................................................................................
3M™ Mobile Projector MP410 English Safety Instructions Important Notice All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use.
English 3M™ Mobile Projector MP410 Warning To reduce the risk associated with hazardous voltage: Do not modify this product in any way. Use only 3M approved replacement components. Do not attempt to service this projector. There are no user-serviceable parts. Service to be performed only by a 3M authorized service provider using 3M approved system components. Do not use the wall power supply in a wet environment. Do not use with a damaged wall power supply.
3M™ Mobile Projector MP410 English To reduce the risk associated with environmental contamination: Dispose of all system components in accordance with applicable government regulations. To reduce the risks associated with LED bright light: Do not stare directly into the projector lens. To reduce the risks associated with tripping and falling: Position the charging cord and data cables so that they are not a tripping hazard.
English 3M™ Mobile Projector MP410 Limited Warranty This warranty applies to the continental US only. The warranty terms, conditions, remedy and limitation may vary in other countries. Contact your local 3M Company for warranty information. The 3M™ Mobile Projector MP410 (the “3M product”) is warranted to be free from defects in material or manufacture for a period of 2 year from the date of purchase.
3M™ Mobile Projector MP410 English e. This warranty covers only normal use of the product. 24-hour-per-day or other excessive continual use causes strain and is not considered normal use. f. This warranty does not cover consumables (e.g., batteries). g. This warranty is not transferable. h.
English 3M™ Mobile Projector MP410 Trademarks 3M and the 3M logo are trademarks of 3M Company. Adobe and the Adobe logo are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. Microsoft, PowerPoint, and Excel are registered trademarks of Microsoft Corporation. microSD and microSDHC are trademarks of the SD Association. All other trademarks or registered trademarks are property of their respective companies.
3M™ Mobile Projector MP410 English Regulatory Notices FCC STATEMENT - CLASS B This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instruction manual may cause interference to radio communications.
English 3M™ Mobile Projector MP410 CE Statement ElectroMagnectic Compatibility Statement: Meets 2004/108/EC Directive Low Voltage Directive: Meets 2006-95-EC Directive. WEEE Statement The following information is only for EU-members States: The mark shown to the right is in compliance with Waste Electrical and Electronic Equipment Directive 2002/96/EC (WEEE).
3M™ Mobile Projector MP410 English Introduction Package Contents Your projector comes with all the items shown below. Ensure that you have all the items, and contact your local reseller or service center if anything is missing. Projector Power cable AC adapter Universal 24-pin to VGA cable CD operator’s guide and documentation Carrying case Optional Contents Remote control NOTE: The remote control is shipped without battery. © 3M 2012. All Rights Reserved.
English 3M™ Mobile Projector MP410 About Your Projector Main Unit 1 2 3 4 5 # Description 1 Control panel 2 Focus ring 3 Lens 4 Input / Output connections 5 Tilt adjusting wheel 12 © 3M 2012. All Rights Reserved.
3M™ Mobile Projector MP410 English Input / Output Connections 1 2 USB-A Micro SD Universal I/O HDMI A/V in DC in 7 6 5 4 # Description 1 MicroSD card slot 2 USB Type A connector 3 DC input connector 4 Audio/Video input connector 5 HDMI connector 6 Universal I/O connector 7 Security cable slot © 3M 2012. All Rights Reserved.
English 3M™ Mobile Projector MP410 Control Panel 1 9 2 8 3 4 7 5 6 2 # Name Description 1 Power Turns the projector on or off. 2 Keystone adjustment Press to adjust image distortion caused by tilting the projector (+/-40 degrees). 3 Auto adjust Press to synchronize the projector to the input source. NOTE: Auto Adjust does not operate if the on-screen display (OSD) is displayed. 4 Error LED Error LED is blinking amber, one of the fans has failed.
3M™ Mobile Projector MP410 English Remote Control (Optional) 1 10 2 3 11 12 4 5 13 6 14 7 8 9 © 3M 2012. All Rights Reserved. # Name Description 1 Power Turns the projector on or off. 2 Source Press to enter Source menu and select an input source. 3 Aspect Ratio Press to change aspect ratio of a displayed image. 4 Enter Press to confirm the selection. 5 Volume up Press to increase the volume. 6 Volume down Press to decrease the volume. 7 Menu Press to activate the OSD.
Installing the Remote Control Battery (Optional) 25 LT C R 20 2. Insert a CR2025 coin cell battery and align the polarity correctly according to the marking in the battery holder. S . Remove the battery holder by holding down the side release firmly and pulling out the battery holder. S 25 LT 3V O NOTE: When you use the remote control for the first time, there is a plastic sheet between the battery and its contact. Remove the sheet before use. O 3V C R 20 25 20 LT R 3V O M S 3.
3M™ Mobile Projector MP410 English Installation Connecting to a Computer 1 5 3 4 2 USB-A Micro SD Universal I/O HDMI A/V in DC in # Description 1 Power cord 2 AC adapter 3 Universal 24-pin to VGA cable 4 HDMI cable * 5 USB-A to USB-A cable * * NOTE: The accessory is not shipped with your projector. © 3M 2012. All Rights Reserved.
English 3M™ Mobile Projector MP410 Connecting to a DVD Player 1 4 3 2 USB-A Micro SD Universal I/O HDMI A/V in DC in # Description 1 Power cord 2 AC adapter 3 HDMI cable * 4 3.5 mm jack A/V to RCA cable * * NOTE: The accessory is not shipped with your projector. 18 © 3M 2012. All Rights Reserved.
3M™ Mobile Projector MP410 English Connecting to Multi-Media 1 4 3 2 USB-A Micro SD Universal I/O HDMI A/V in DC in # Description 1 Power cord 2 AC adapter 3 MicroSD card * 4 USB flash disk * * NOTE: The accessory is not shipped with your projector. © 3M 2012. All Rights Reserved.
English 3M™ Mobile Projector MP410 Turning On/Off the Projector Turning Your Projector On NOTE: Turn on the projector before you turn on the source (computer, DVD player, etc.). The Power button light blinks blue until pressed. . Connect the power cord with AC adapter and appropriate signal cables to the projector. 2. Press the Power button. 3. Turn on your source (computer, DVD player, etc). 4. Connect your source to the projector using the appropriate cable. 5.
3M™ Mobile Projector MP410 English Adjusting the Projected Image Raising the Projector Height Raise the projector to the desired display angle, and use the front tilt adjustment wheel to fine-tune the display angle. Lowering the Projector Height Lower the projector, and use the front tilt adjustment wheel to fine-tune the display angle.
Adjusting Projection Image Size 80” (203.2 cm) 70” (177.8 cm) Projector to screen distance 60” (152.4 cm) 50” (127.0 cm) 40” (101.6 cm) 4.23’ (1.29 m) 5.28’ (1.61 m) 6.36’ (1.94 m) 7.41’ (2.26 m) 30” (76.2 cm) 8.48’ (2.58 m) English 3M™ Mobile Projector MP410 3.18’ (0.97 m) USB-A Micro SD Universal I/O HDMI A/V in DC in 22 © 3M 2012. All Rights Reserved.
3M™ Mobile Projector MP410 Screen Size 30” (76.2 cm) 25.59” x 15.75” 40” (101.6 cm) English Screen (Diagonal) Hd Distance 65 cm x 40 cm 15.75” (40 cm) 3.18’ (0.97 m) 33.86” x 21.26” 86 cm x 54 cm 21.26” (54 cm) 4.23’ (1.29 m) 50” (127.0 cm) 42.13” x 26.38” 107 cm x 67 cm 26.38” (67 cm) 5.28’ (1.61 m) 60” (152.4 cm) 50.79” x 31.89” 129 cm x 81 cm 31.89” (81 cm) 6.36’ (1.94 m) 70” (177.8 cm) 59.45” x 37.01” 151 cm x 94 cm 37.01” (94 cm) 7.41’ (2.26 m) 80” (203.2 cm) 67.
English 3M™ Mobile Projector MP410 User Controls Using the On-Screen Display . The projector has a multi-language On-Screen Display (OSD) Menu that can be displayed with or without an input source. 2. Press the Menu button on the control panel or the remote control to enter the Main Menu. 3. To select an option, press the remote control. 4. Use the or or buttons on your projector’s control panel or buttons on the control panel or remote control to adjust the settings. 5.
3M™ Mobile Projector MP410 English Source The Source menu allows you to select your projector's input source. Auto If you select and press available input source. to activate, the Auto option will automatically find the next VGA Press to detect a VGA signal. DoUSB Allows you to display the computer/laptop screen to your projector via the USB cable.
English 3M™ Mobile Projector MP410 A/V In Allows you to display the Audio/Video source to your projector via the A/V cable. USB Allows you to playback the photo, Audio, or Video files from your USB flash disk. MicroSD Allows you to playback the photo, Audio, or Video files from your microSD card. Internal Memory Allows you to playback the photo, Audio, or Video files from internal memory of the projector. Video Mode The Video Mode menu allows you to optimize the display image.
3M™ Mobile Projector MP410 English Auto Adjust Auto Adjust automatically adjusts the projector's Horizontal, Vertical, Frequency, and Tracking in PC mode. OSD Reset Select and press to reset all settings to its factory default. The below warning message appears: Reset items include both computer sources and Video source settings. Advanced See “Advanced Menu” on pages 28~32. SN Display the projector’s serial number. FW Version Display the current projector’s firmware version. © 3M 2012.
English 3M™ Mobile Projector MP410 Advanced Menu The Advanced menu allows you to change settings for Display, Image, and Power. Display (In PC Mode) Select and press options: to activate display settings. The display menu provides the following Horizontal Position Press to move the image right and to move the image left. Vertical Position Press to move the image up and to move the image down.
3M™ Mobile Projector MP410 Allows you to select the aspect ratio to adjust how the image appears. Options are: Origin, 16:9 and 4:3. Origin: Select Origin to maintain the aspect ratio of the image projector according to the input source. 16:9: The input source scales to fit the width of the screen to project a 16:9 screen image. 4:3: The input source scales to fit the screen and projects a 4:3 image. Zoom Press or to zoom and view the image.
English 3M™ Mobile Projector MP410 Image (In PC Mode) Select and press options: to activate image settings. The image menu provides the following Brightness Press and to adjust the brightness of the image. and to adjust the display contrast. Contrast Press Color Temperature Allows you to adjust the color temperature. The screen appears cooler at higher color temperatures and warmer at lower color temperatures. White Intensity Press and use and to display white intensity.
3M™ Mobile Projector MP410 English Contrast Press and to adjust the display contrast. Color Temperature Allows you to adjust the color temperature. The screen appears cooler at higher color temperatures and warmer at lower color temperatures. Saturation Allows you to adjust the video source from black and white to fully saturated color. Press to increase the amount of color in the image and to decrease the amount of color in the image.
English 3M™ Mobile Projector MP410 Power Select and press options: to activate power settings. The power menu provides the following Power Saving Select Off to disable Power Saving mode. By default, the projector is set to enter power saving mode after 120 minutes of no activity. A warning message appears on screen showing a 60 seconds countdown before switching to power saving mode. Press any button during the countdown period to stop the power-saving mode.
3M™ Mobile Projector MP410 When password protect is enabled, a password protect screen requesting you to enter a password will be displayed when the power plug is inserted into the electrical outlet and the power for the projector is first turned on. By default, this function is disabled. You can enable this feature by selecting Enabled. If the password has been set before, key in the password first and select the function.
English 3M™ Mobile Projector MP410 Change Pasword 1. Key in the original password. 2. Then, enter the new password and confirm the new password again. Display Hour Display the projection time. 34 © 3M 2012. All Rights Reserved.
3M™ Mobile Projector MP410 English Multi-Media Introduction Multi-media format supported: Photo Format Image Type (Ext Name) Sub Type Encode Type Max Pixels Max Size Jpeg / Jpg Baseline YUV420 No Limitation 2GB 64x panel resolution 2GB YUV422 YUV440 YUV444 Progressive YUV420 YUV422 YUV440 YUV444 BMP 64x panel resolution Video Format File Format Video Format Profile & Level Max Res Max Bit Rate (bps) Audio Format MOV, MP4, AVI, MKV, DIVX H264 less than 4 reference frames 1080P 20
English 3M™ Mobile Projector MP410 How to set-up File Type for Multi-Media with USB NOTE: A USB flash disk must be plugged into the projector if you want to use the multimedia USB function. Follow these steps to playback the Photo, Video, or Music files on your projector: . Connect the power cable with AC adapter and turn on the projector by pressing the Power button. 2. Plug in a USB flash disk to your projector. USB-A Micro SD Universal I/O HDMI A/V in DC in 3.
3M™ Mobile Projector MP410 English How to set-up File Type for Multi-Media with MicroSD NOTE: A microSD card must be plugged into the projector if you want to use the multimedia microSD function. Follow these steps to playback the Photo, Video, or Music files on your projector: . Connect the power cable with AC adapter and turn on the projector by pressing the Power button. 2. Plug in a MicroSD card to your projector.
English 3M™ Mobile Projector MP410 How to set-up File Type for Multi-Media with Internal Memory Follow these steps to playback the Photo, Video, or Music files on your projector: . Connect the power cable with AC adapter and turn on the projector by pressing the Power button. 2. Access the Source menu, select the Internal Memory option and press the button. The image input source will automatically switch to Multimedia Menu when Internal Memory option is selected in this step. 3.
3M™ Mobile Projector MP410 English Multi-Media Main Menu Multi-Media SETUP for USB, MicroSD, and Internal Memory The multi-media setup menu allows you to change settings for Photo, Video, and Music. NOTE: Multi-media setup menu and set are the same for the USB, MicroSD, and Internal Memory. © 3M 2012. All Rights Reserved.
English 3M™ Mobile Projector MP410 Photo Setup Select and press following options: to activate photo setup menu. The photo setup menu provides the Display Mode Press or to select the display mode of the photo on the screen. Options are: File List, Browse Mode, Thumbnail, and Slideshow. Display Ratio Press or screen). to select the display ratio of the photo as Auto (original ratio) or Full (full Slideshow Duration Press or to select the slideshow duration.
3M™ Mobile Projector MP410 English Video Setup Select and press following options: to activate video setup menu. The video setup menu provides the Display Ratio Press or to select the display ratio of the Video. Auto: Keep original aspect ratio. Full: Full screen. Play Mode Press or to select the video play mode. Options are: Once, Repeat Once, Repeat, and Random. Auto Play Select On to play the video automatically while entering the video list. © 3M 2012. All Rights Reserved.
English 3M™ Mobile Projector MP410 Music Setup Select and press following options: to activate music setup menu. The music setup menu provides the Play Mode Press or to select the video play mode. Options are: Once, Repeat Once, Repeat, and Random. Show Spectrum Select On to show the spectrum plot while music is playing. Auto Play Select On to play the music automatically while entering the music list. 42 © 3M 2012. All Rights Reserved.
3M™ Mobile Projector MP410 Select and press to activate firmware update menu. The firmware update menu provides the following options: Media Select Yes to enter firmware update screen, and then select Confirm option to update your media firmware by microSD card. Image Processor Select Yes to enter firmware update screen, and then select Confirm option to update your Video decoder firmware by microSD card.
English 3M™ Mobile Projector MP410 Appendices Troubleshooting If you experience problems with your projector, see the following troubleshooting tips. If the problem persists, contact your local reseller or service center. Problem Possible Solution No image appears on the screen Partial, scrolling or incorrectly displayed image Ensure that the projector is turned on. Ensure that you have chosen the correct input source on the OSD Source menu. Ensure the external graphics port is enabled.
3M™ Mobile Projector MP410 Possible Solution The image is stretched when displaying a 16:9 DVD The projector automatically detects the input signal format. It will maintain the aspect ratio of the projected image according to input signal format with an Original setting. If the image is still stretched, adjust the aspect ratio in the Display settings of the Advanced menu in the OSD. Error LED is blinking amber A projector fan has failed and the projector will automatically shut down.
English 3M™ Mobile Projector MP410 Guiding Signals Projector Status Description Standby mode Projector in Standby mode. Ready to power on. Power TEMP ERROR (Blue/Amber) (Amber) (Amber) BLUE OFF OFF Flashing Warming up mode Projector takes some time to warm up BLUE and power on. OFF OFF LED on Projector in Normal mode, ready to display an image. BLUE OFF OFF BLUE OFF OFF NOTE: The OSD menu is not accessed. Cooling mode Projector is cooling to shutdown.
3M™ Mobile Projector MP410 English Compatibility Modes (Analog/Digital) Resolution Refresh Rate (Hz) Hsync Frequency (KHz) Pixel Clock (MHz) 640 x 350 70.087 31.469 25.175 720 x 400 70.087 31.469 28.322 720 x 400 70.087 31.469 28.322 640 x 480 59.940 31.469 25.175 640 x 480 75.000 37.500 31.500 640 x 480 85.008 43.269 36.000 800 x 600 60.317 37.879 40.000 800 x 600 75.000 46.875 49.500 800 x 600 85.061 53.674 56.250 1024 x 768 60.004 48.363 65.
English 3M™ Mobile Projector MP410 Specifications Item Specification Light Valve 0.45” WXGA S450 DMD, DarkChip3™ Brightness 300 ANSI lumens (Typical) Contrast Ratio 10000:1 Typical (Full On/Full Off) Uniformity 80% Typical (Japan Standard - JBMA) Number of Pixels 1280 x 800 (WXGA) Internal Flash 1 GB Memory (Max.) Displayable Color 1.073 billion colors Projection Lens F-Stop: F/ 2.0 f=14.95 mm Fixed Lens Throw ratio = 1.
3M™ Mobile Projector MP410 English Item Specification Environmental Operating temperature: 5 ºC to 35 ºC (41 ºF to 95 ºF) Humidity: 80% maximum Storage temperature: 0 ºC to 60 ºC (32 ºF to 140 ºF) Humidity: 80% maximum Power: One DC power jack VGA input: One 24-pin universal connector (Black) for analog RGB input signals and supporting Audio output. HDMI input: One HDMI connector for supporting HDMI 1.3. HDCP compliant. AV input: One 3.
Mobile Interactive Solutions 3M Austin Center 6801 River Place Blvd. Austin, TX 78726-9000 866-631-1656 www.3Mmobileprojector.com e-mail: meetings@mmm.com 3M is a trademark of 3M Company. All other trade names referenced are the service marks, trademarks or registered trademarks of their respective companies. © 2012 3M. All Rights Reserved. Made in China 78-6971-1613-1 Rev.
