PLEASE READ This manual is provided as a free service by Projector.com. We are in no way responsible for the contents of the manual. We do not guarantee its accuracy and we do not make any claim of copyright. The copyright remains the property of their respective owners. ABOUT PROJECTOR.COM Projector.com (http://www.projector.com) is your review and buying guide resource for DLP and LCD video projectors.
om c to r .c MP7630 Multimedia Projector Operator’s Guide MP7630 Projecteur multimédia Guide de l’opérateur oje MP7630 Multimedia-Projektor Benutzerhandbuch Proyector de Multimedia MP7630 Manual del Usuario Pr MP7630 Proiettore Multimediale Manuale dell’operatore MP7630 Bruksanvisning för multimediaprojektor A TEXAS MENTS PRODU CT D LP Lo ck Do INSTRU wn loa MP7630 de d fro m MP7630 Multimedia Projector Gebruiksaanwijzing © 3M IPC 2000 Downloaded from www.Manualslib.
om c to r .c oje Pr m fro de d wn loa Do 2 Downloaded from www.Manualslib.
Table of Contents Introduction Safeguards .................................................................................... 4 c to r .c Thank You for Choosing 3M .......................................................... 6 om Please click on any section to jump to that section Warranty ........................................................................................ 6 Shipping Box Contents .................................................................. 7 Optional Accessories ...........
Introduction om Intended Use c to r .c Before operating the machine, please read the entire manual thoroughly. The 3M Multimedia Projector MP7630 was designed, built, and tested for use indoors, using 3M lamps, 3M ceiling mount hardware, and nominal local voltages.
Introduction om Product Safety Labels c to r .c The following safety labels are used on or within the MP7630 projector to alert you to items or areas requiring your attention. Tested To Comply With FCC Standards FOR HOME OR OFFICE USE oje Rating: ~100-240V, 50-60Hz, 2A YWWXXXXXHD8312 H Laser Standby/On Source Menu Exit R N214 Drag M nify ag - BAR CODE 39 (9170A02007YWWXXXXXHD8312) ERGONOMICS APPROVED + Pr TUV Rheinland Gruppe k Clic geprufte Sicherheit Blank L- ERGONOMIE ..
Introduction om Thank You for Choosing 3M Thank you for choosing 3M multimedia projection equipment. This product has been produced in accordance with 3M’s highest quality and safety standards to ensure smooth and troublefree use in the years to come. c to r .c For optimum performance, please follow the operating instructions carefully. We hope you will enjoy using this high performance product in your meetings, presentations, and training sessions.
Introduction om Shipping Box Contents c to r .c The 3M™ MP7630 Multimedia Projector is shipped with the necessary cables required for standard VCR, PC, Macintosh™ or laptop computer connections. Carefully unpack and verify that you have all of the items shown below. If any of these items are missing, please contact your place of purchase.
Introduction 2 3 c to r .c 1 om Part Identification 4 MP7630 A TEXAS MENTS PRODU CT D LP INSTRU 5 ck Lo 7 8 9 m 10 14 fro 11 Pr 12 oje 6 Laser Standby/On Source Menu Exit Freeze Blank R -C lic k k Clic L- Drag - de d Mute Ch Down Reverse 1 2 3 4 5 6 7 8 +/- 0 Add/Erase 9 Scan 8. Projection Lens 9. Height Adjustment Feet 10. AC Power Cord Input 11. Serial Port Terminal Connection 12. Mouse Control Port (Serial • PS/2 • ADB) 13.
Introduction om Machine Characteristics The MP7630 Multimedia Projector integrates ultra-high bright lamp and TI™ DLP™ technology into a single unit. Small and portable unit Easy to set up and use SVGA resolution and component video compatible Horizontal and vertical image inverting Horizontal and vertical image position control Ultra-high brightness projection lamp Ability to display 16.
Introduction Source Press button to change input source. Standby/On Laser Press STANDBY/ON button to begin projection mode (lamp on). To turn lamp off, press STANDBY/ON, then select YES on Shutdown screen. Select NO to continue running. Press button to turn on the Laser Pointer Exit Laser Standby/On Source Menu Exit Menu Menu Selection Arrows Blank Freeze oje Freeze Blank Press button to turn the screen blanking function ON/OFF. Pr Press button to turn the freeze image function ON/OFF.
Introduction om Remote Control Features c to r .c The remote control sensor is located near the back of the projector. The distance between the sensor and the remote control unit must be shorter than 4 meters (13 feet). Freeze button “Pause” icon oje Freeze The image will be frozen when the FREEZE button is pressed. A “Pause” icon appears at the lower right of the screen for three seconds during the freeze function.
Introduction om Laser Press this button to generate the laser beam that functions as a red pointer on the screen. Laser button oje Disk Pad button c to r .c Disk Pad If the PS/2 (ADB) mouse cable is connected with the PC Notebook or Mac PowerBook mouse port, the Disk Pad can take over the Notebook or PowerBook mouse function. When the MAGNIFY function is activated, use the Disk Pad to move around the display areas. Note: The mouse function is not available when the MAGNIFY function is turned on.
System Setup om Screen Chart c to r .c Place the projector at the required distance from the screen according to the desired picture size (see the table below). Screen Size Width Height Diagonal Minimum Maximum 81 cm (32 in.) 61 cm (24 in.) 102 cm (40 in.) 140 cm (4.6 ft.) 433 cm (14.2 ft.) 122 cm (48 in) 91 cm (36 in.) 152 cm (60 in.) 214 cm (7.0 ft.) 655 cm (21.5 ft.) oje Lens center Distance to Screen 122 cm (48 in.) 203 cm (80 in.) 287 cm (9.4 ft.) 384 cm (28.7 ft.
System Setup om Connecting to Various Equipment c to r .c It only takes a few minutes to connect the 3M™ Multimedia Projector MP7630 to your computer, VCR, or other device. Caution MOUSE VIDEO SERIAL PS/2 or ADB Cable Do 14 Downloaded from www.Manualslib.com manuals search engine IN VIDEO RGB PORT MOUSE IN wn loa PC or Mac de d fro Connection Terminals m Pr oje Turn off power to all devices before making connections.
om System Setup Apple™ Desktop Mouse The Macintosh operating system should recognize the MP7630 as a mouse without any drivers being loaded. c to r .c VirtualMouse for PC Computer For IBM™ compatible computers, set the operating systems to Serial Mouse or PS/2 Mouse to recognize projector as the mouse pointer device. To set mouse driver information: oje a) Windows™ 95/Windows™ 98/Windows™ NT 1. Select Start/Settings/Control Panel. 2. Select Add New Hardware. 3.
Operation om Startup c to r .c 1 ✓ Note: Make all cable connections and line hookups with the power off. oje Power Standby/ON Standby/On fro m Pr 2 Standby/On de d Standby/On 1. Plug power cord into wall socket. wn loa 2. Press the STANDBY/ON button • The ON indicator blinks green and then stays green. • The ON indicator will blink green during warm-up and lamp ignition. (When power is turned off, there is a 90-second reset period before the STANDBY/ON button will function again.) 3.
Operation om Main Menu c to r .c Press “Menu” key and the main menu will display on the screen. Press “Menu” again to enter page items, and press and to select sub-menus. The main menu will go off automatically if there is no further action from user for 10 seconds. Press EXIT button to leave the current sub-menu, and press EXIT again to leave the main menu.
om Operation DLP c to r .c A TEXAS INSTRUMENTS PRODUCT Menu MP7630 EXIT 50 50 Contrast Contrast 50 50 ColorBalance Balance Color 11 Menu fro x2 Exit Keystone 00 Brightness 50 50 Contrast 50 50 Color Balance 11 Display Menu Do wn loa de d Menu Menu m EXIT To Menu Items 1 Brightness Brightness Pr MENU STANDBY/ON 00 oje Menu MENU Keystone Keystone Exit 18 Downloaded from www.Manualslib.
Operation (0-255) 128 160 96 oje 128 (0-255) Pr Brightness c to r .c Keystone om Display Menu 128 128 193 1 2 wn loa 65 193 fro (0-255) de d Contrast m 65 Do Color Balance (0-2) 0 © 3M IPC 2000 Downloaded from www.Manualslib.
om Operation Image Menu 1 c to r .c To Menu Items Menu Menu Off Off Auto Auto Resize Resize x1 H.Phase H.Phase Menu x1 Menu 127 127 H.Size H.Size 165 165 x1 Menu Auto Resize V.Position V.Position oje H.Position H.Position Menu 105 105 Pr 3 31 31 Will automatically adjust image to fit onto screen.
om Operation Operation Menu 1 Menu x1 Menu 2 Menu Language En Mirror Normal x1 Menu Menu x1 It V-Inv Es N-Inv Sv Ne N/V-Inv 15 Press “+” or “-” to reset Deutsch (De) Italian (It) Español (Es) m Mirror English (En) French (Fr) Swedish (Sv) Dutch (Ne) Will invert image to display properly according to position of projector. fro Language Reset De 0(Stop) Pr Menu Fr oje Auto Off 3 c to r .
Operation om Shutdown c to r .c 1 Standby/ON Standby/On Standby/On 2 oje Standby/On 00:01:00 00:00:30 00:01:30 fro m 00:00:00 Pr Wait 90 seconds Power de d 3 wn loa 1. Press the STANDBY/ON button. The Shutdown screen will display. Select the YES option (press arrow button or mini-joystick) to turn off. 2. The fan will continue to run for approximately 90 seconds. 3. Disconnect power cord from wall socket. Do 4. Disconnect cables if moving projector to new location.
om Optional Video Module Features c to r .c The Optional Video Module makes it possible to hook the MP7630 to a laser disc, VCR, or other video devices. Two versions will be available: an NTSC Package (with RCA connectors and television tuner), and a PAL package (with a SCART connector and no television tuner).
om Optional Video Module Attaching the Optional Video Module to the MP7630 Power down the projector before connecting the Optional Video Module or any other device. Failure to do so may cause serious damage. c to r .c Caution 1. Precisely align the two metal tabs on the bottom of the module and insert into the corresponding slots on the back of the projector. oje 2. Slowly push the module to fit with the unit. Make sure that the module plugs into the AV con nection on the projector. 3.
om Optional Video Module Image Sub-Menu c to r .c This menu is only available when the input signal is from Video, S-Video, TV or CATV. } Auto PAL-M Color Pr -123- m fro Color wn loa de d Less Red SECAM -123- Tint Tint PAL-N oje System 16:9 (Video) 4:9 (Normal) Image Ratio More Green (Source is video or S-video) Image Ratio 4:9 (Normal) 16:9 (Video) Do System Auto PAL-M © 3M IPC 2000 Downloaded from www.Manualslib.
Optional Video Module om Operation c to r .c 1. Go into the menu system and move to the Source sub-menu. Use the Menu key on the control pad or remote control unit to scroll through items in the sub-menu. Select the Tuner items and press or keys to prompt out of the tuner menu. } Source PC Video S-Video 15 8 Treble 8 Bass On Pr Off Press "<-" or "->" to select m Tuner oje Volume Mute Tuner wn loa de d fro 2.
Optional Video Module Yes c to r .c START SCANNING? om 3. After leaving the menu system, press the Scan button to scan all existing channels in that region. ✓ Note: Scan function must be done for the first use in certain regions to catch all the channels in the local CATV system. No oje After the “Start scanning” dialog box prompt, use the channel up/down key to select “Yes” or “No.” Press Return key to set.
Optional Video Module om Source Menu PC Source S-Video Tuner 8 Treble 8 Bass On oje Off Press "<-" or "->" to select Do wn loa de d fro m Pr Tuner Video 15 Volume Mute c to r .c } 28 Downloaded from www.Manualslib.
Maintenance om Lamp Use and Replacement of Lamp c to r .c The projector lamp has a normal operating time of approximately 1200 to 1500 hours, called the lamp life. During the normal lamp life, the picture will be bright and the colors clear. If the lamp is used beyond the normal lamp life, the picture will become dark and the colors poor. Always replace lamps with new ones. Using an old lamp in the projector could cause a malfunction.
Maintenance WARNING om Lamp Replacement To reduce the risk of electrical shock, always turn off projector and disconnect power cord before changing lamp. de d fro m Pr oje c to r .c 1. Turn the main power switch off and disconnect the power cord from the outlet. 2. Loosen screw and remove the lamp cover. If the lamp is hot, avoid burns by waiting 45 minutes until lamp has cooled. 3. Loosen three screws designated by arrows below.
Maintenance om Resetting the Lamp Hours c to r .c Please do the following within 10 minutes from turning power on if you replace the lamp after 1500 hours. 1. Press the Exit button on projector or remote control for three seconds to display the total used lamp time. oje 2, Press MENU button on projector or remote control during the lamp hour message. Then an adjustment message will appear. Pr 3. Press or to select the setting.
PROBLEMS SOLUTIONS om Troubleshooting ✓ Plug the power cord into the AC inlet. ✓ Plug the power cord into the power inlet. ✓ Wait 2 minutes after turning off the projector before turning it back on. NO PICTURE ✓ Check that you have selected the proper input source to project. ✓ Ensure that all cables are connected properly. ✓ Adjust the brightness and contrast. ✓ Remove the lens cap. ✓ Reposition the unit to improve its angle to the screen.
Troubleshooting Meaning (and Solution, if applicable) c to r .c Message Displayed om Status Indicator Lights and Messages SEARCHING Projector cannot identify input signal. INPUT SIGNAL DETECTED, ACTIVATING AUTO IMAGE Projector has identified input signal. The input signal's horizontal frequency exceeds the range of the projector's. CHANGE THE LAMP AND RESET THE LAMP TIMER The lamp has been operated for over 1200 hours and needs to be replaced soon.
Service Information om Accessories Part Number c to r .c Description Pr oje Power Cord (EU) ........................................................................................ DY-0205-1354-4 Power Cord (US) ........................................................................................ DY-0205-1356-9 Power Cord (UK) ....................................................................................... DY-0205-1355-1 Adapter, PS/2 Mouse .................................................
Appendix om Technical Specifications ✓ Note: All specifications are subject to change without notice. Product name Model name c to r .c General Multimedia Projector MP7630 Optical 1-CHIP DMD Lens Lamp F/Number: F/2.7 – F/3.4 150 W UHP lamp Focal Length: F = 72 – 108 mm (2.8 in. – 4.3 in.) oje Display system Electrical AC100 ~ 240V, 6.5A ~ 2.9A, 50/60 Hz (Automatic) Power consumption 200 W (Max) Pr Power supply Mechanical 8 in. (W) x 2.6 in. (H) x 9.7 in.
om Appendix oje 246 mm ( 9.7 in ) MENU EXIT Pr MP7630 Lock DLP A TEXAS INSTRUMENTS PRODUCT c to r .c Dimensions STANDBY/ON de d 67 mm ( 2.6 in ) fro m 202 mm ( 8 in ) Do wn loa 67 mm ( 2.6 in ) 36 Downloaded from www.Manualslib.
Appendix H Sync (kHz) V Sync (kHz) 640 x 350 31.5 70.1 640 x 400 37.9 85.1 720 x 400 31.5 70.0 720 x 400 37.9 85.1 640 x 480 31.5 60.0 640 x 480 37.9 72.8 640 x 480 35 640 x 480 43.3 800 x 600 35.2 800 x 600 37.9 800 x 600 46.9 800 x 600 48.1 800 x 600 53.7 832 x 624 49.7 1024 x 768 oje VESA VESA VESA Macintosh 85.0 VESA 56.3 VESA Pr 66.7 75.0 VESA 72.2 VESA 85.1 VESA 74.5 Macintosh 48.4 60.0 VESA 56.5 70.1 VESA 60.0 75.
Appendix om Nationality Codes API TV System Code Definition USA 1 (STD) NTSC Taiwan 1 NTSC Canada 1 NTSC Chile 1 NTSC Columbia 1 NTSC Mexico 1 NTSC Peru 1 NTSC South Korea 1 NTSC Venezuela 1 NTSC Japan 4 PAL-N Argentina PAL-N Paraguay PAL-N Uruguay PAL-M Brazil 2 (HRC) 2 (IRC) oje NTSC Pr Channel m Area c to r .c NTSC Tuner Box fro 5 5 5 Do wn loa de d 6 38 Downloaded from www.Manualslib.
om c to r .c oje Pr m fro de d wn loa Do © 3M IPC 2000 Downloaded from www.Manualslib.
om c to r .c oje Pr m fro Important Notice All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use.
PLEASE READ This manual is provided as a free service by Projector.com. We are in no way responsible for the contents of the manual. We do not guarantee its accuracy and we do not make any claim of copyright. The copyright remains the property of their respective owners. ABOUT PROJECTOR.COM Projector.com (http://www.projector.com) is your review and buying guide resource for DLP and LCD video projectors.
