Cut Sheet

Scotchlok

™

Terminals

MU14-250DFHT/FLAG

High Temperature Female Flag

Disconnect, Non-Insulated, Butted Seam

Data Sheet

Specifications

Wire Size: 16-14 AWG Copper

Barrel Seam: Butted

Maximum Operating Temp: 900˚F (482˚C)

Maximum Current: Same as Wire

Terminal Material: Steel

Plating: Nickel

Installation Information

Strip away the end 3/8 inch of wire insulation.

Make the crimp in the proper station of a recommended

3M crimp tool: TH-450 (scissor style) hand tools.

Barrel Crimp (Required)

WARNING

Turn power off before installing or removing terminal. All electrical

work should be done according to appropriate electrical codes.

rebmuNtcudorP

eriW

egnaR

)GWA(

htiwsetaM

baTelaM

)´W(htdiW

ssenkcihTxL

lerraB

htgneL

lerraB

.D.I

GALF/THFD052-41UM41-61230.0x052.015.062.0590.0

PAGE 1
Scotchlok™ Terminals MU14-250DFHT/FLAG High Temperature Female Flag Disconnect, Non-Insulated, Butted Seam Data Sheet Product Number Wire Range (AWG) Mates with Male Tab Width(W´ ) x Thickness L Barrel Length Barrel I.D. MU14-250DFHT/FLAG 16-14 0.250 x 0.032 0.51 0.26 0.
PAGE 2
Engineering Specification Crimp-type female quick-slide connectors shall, electrically and mechanically, connect permanently to a pre-stripped end of a stranded copper wire: and have a tongue portion with fingers which grip a male disconnect in a separable, reusable manner, forming a quick connect wiring termination. The non-insulated, butted seam, high temperature 0.250˝ female disconnect shall be nickel-plated steel, with a tongue for gripping a 0.250˝ wide x 0.030˝ or 0.032˝ male tab, and a 0.