Cut Sheet

ManualsBrands3M ManualsConnectorsBlock Fork, Non-Insulated, WR: 16 - 14, Stud Size: 8

Installation Information

UL Listed and CSA Certified for use on stranded copper

(AWG) wire only.

Strip away the end 3/8 inch of wire insulation.

Make the crimp in the proper station of a recommended

3M crimp tool: TH-440, TH-450 (scissor style), or TR-490

(ratchet style) hand tools.

Scotchlok

™

Terminals

MU18-4FB/S thru MU10-10FB

Block Fork, Non-Insulated, Butted Seam

Data Sheet

Specifications

Wire Size: See Table Above

Barrel Crimp (Electrical)

LISTED 314R

UNDERWRITERS

LABORATORIES

STANDARD NO. UL 486A

3M FILE NO. E23438

CANADIAN STANDARDS

ASSOCIATION

STANDARD NO. C22.2

NO. 0. 65

3M FILE NO. LR22190

tcudorP

rebmuN

eriW

egnaR

)GWA(

dutS

eziSWCLE ssenkcihT

lerraB

htgneL

lerraB

.D.I

S/BF4-81UM81-22452.052.056.005.0030.052.0070.0

S/BF6-81UM81-22652.052.056.005.0030.052..0070.0

BF6-81UM81-22603.052.056.005.0030.052.0070.0

BF8-81UM81-22803.052.056.005.0030.052.0070.0

BF01-81UM81-220103.052.056.005.0030.052.0070.0

S/BF4-41UM41-61452.052.056.005.0030.052.0090.0

S/BF6-41UM41-61652.052.056.005.0030.052.0090.0

BF6-41UM41-61603.052.056.005.0030.052.0090.0

BF8-41UM41-61803.052.056.005.0030.052.0090.0

BF01-41UM41-610103.052.056.005.0030.052.0090.0

BF6-01UM01-21623.092.037.045.0040.052.0531.0

BF8-01UM01-21823.092.037.045.0040.052.0531.0

BF01-01UM01-210123.092.037.045.0040.052.0531.0

WARNING

Turn power off before installing or removing terminal. All electrical

work should be done according to appropriate electrical codes.

Summary of content (2 pages)

PAGE 1
Scotchlok™ Terminals W MU18-4FB/S thru MU10-10FB Block Fork, Non-Insulated, Butted Seam C E L Data Sheet Product Number Wire Range (AWG) Stud Size W C L E Thickness Barrel Length Barrel I.D. MU18-4FB/S 22-18 4 0.25 0.25 0.65 0.50 0.030 0.25 0.070 MU18-6FB/S 22-18 6 0.25 0.25 0.65 0.50 0.030 0..25 0.070 MU18-6FB 22-18 6 0.30 0.25 0.65 0.50 0.030 0.25 0.070 MU18-8FB 22-18 8 0.30 0.25 0.65 0.50 0.030 0.25 0.070 MU18-10FB 22-18 10 0.30 0.25 0.65 0.
PAGE 2
Engineering Specification Crimp-type terminals shall, electrically and mechanically, connect to a pre-stripped end of a stranded copper wire: and have a flat tongue portion with a central opening for mounting around a screw or stud. The terminal line shall offer tongue variations in hole (stud) size (6, 8 10, etc.) and configuration (ring, fork, block fork, flanged block fork, locking fork, etc.): and barrel variations in wire (AWG) size (22-18, 16-14, 12-10, etc.