Datasheet

ManualsBrands3M ManualsConnectorsPin header DIN 41651 20, Male

Electronic Solutions Division

Interconnect Solutions

http://www.3Mconnectors.com

3M is a trademark of 3M Company.

For technical, sales or ordering information call

800-225-5373

™

Four-Wall Header

.100” × .100” Latch/Ejector, Straight and Right Angle 3000 Series

• Military (with 3M’s 3518 & N3518 polarizing key) and

centerbump polarization

• Optional ejector latches

• Mounting holes for securing header to board

• Optional polarizing posts available

• High temperature insulator option suitable for “no lead”

soldering operations

• High temperature option suitable for reﬂ ow soldering

using “paste in hole” techniques

• Solder tail option

• See the Regulatory Information Appendix (RIA) in the

“RoHS compliance” section of www.3Mconnectors.com

for compliance information

Date Modiﬁ ed: May 21, 2012 TS-0772-N

Sheet 1 of 4

Physical

Insulator:

Material: Glass Filled Polyester (PBT)

Glass Filled Polyester (PCT) - (High Temp Option)

Flammability: UL 94V-0

Color: Gray (PBT), Black (PCT)

Contact:

Material: Copper Alloy

Plating:

Underplating:

100 µ” [2.54 µm] Nickel - Overall

Wiping Area: 30 µ” [ 0.76 μm ] Gold

Solder Tails: Tin Lead or Matte Tin (See Ordering Information)

Marking:

3M Logo, Part Identi cation Number and Orientation Triangle

Electrical

Current Rating:

5.00 A, 1 Contact Powered

3.00 A, 6 Contacts Powered

1.75 A, All Contacts Powered

Rating Conditions: EIA-364-070 Method 2, 30°C maximum temperature rise,

20% derated. Reference appropriate 3M Product Speci cation for detailed current

derating curves.

Insulation Resistance:

>1 × 10

Ω at 500 V

Withstanding Voltage:

1,000 V

RMS

at Sea Level

Environmental

Temperature Rating:

-55°C to +105°C

Process Rating:

High Temp PCT insulator version: 260°C, per J-STD-020C, single pass

PBT insulator version: 191°C, maximum insulator temperature, solder wave

process only

Moisture Sensitivity Level:

1 (per J-STD-020C) High Temp. (PCT) versions only

UL File No.: E68080

Summary of content (5 pages)

PAGE 1
3M™ Four-Wall Header .100” × .
PAGE 2
3M™ Four-Wall Header .100” × .100” Latch/Ejector, Straight and Right Angle -X0XX Header without Latch Ejector 3000 Series -X3XX Header with Long Ejector/Latch for 3M Sockets with Strain Relief -X2XX Header with Short Ejector/Latch for 3M Sockets without Strain Relief .68 [17.3] .08 [2.0] .08 [2.0] .573 ± .010 [ 14.55 ] .424 ± .010 [ 10.77 ] 1.07 Ref [27.2] .97 Ref [24.6] A .025 ± .002 Sq Typ [ 0.64 ] .37 Ref [9.4] .46 Ref [11.7] D .24 [6.1] .100 2.54 .020 0.51 .28 7.1 REF. .30 [7.6] .
PAGE 3
M™ Four-Wall Header .100” × .100” Latch/Ejector, Straight and Right Angle Table 1 Dimensions B 3000 Series Pin Qty 3M Part Number A C D Polarizing Notches 06 3869 1.065 (27.05) 0.905 (22.99) 0.665 (16.89) 0.505 (12.83) B* 08 3889 1.165 (29.59) 1.005 (25.53) 0.765 (19.43) 0.605 (15.37) B* 10 3793 1.265 (32.13) 1.105 (28.04) 0.865 (21.97) 0.705 (17.91) BC 14 3314 1.465 (37.21) 1.305 (33.12) 1.065 (27.05) 0.905 (22.99) BC 16 3408 1.565 (39.75) 1.405 (35.66) 1.165 (29.
PAGE 4
3M™ Four-Wall Header .100” × .100” Latch/Ejector, Straight and Right Angle 3000 Series Part Customization Polarizing Post This spec sheet details our standard offering. 3M has several capabilities that can provide a part tailored to your specific needs. Ask your 3M sales representative or customer service for more details. Both snap in and roll pin latches may be ordered separately. Snap in and roll style latches are dimensionally and functionally equivalent.
PAGE 5
3M is a trademark of 3M Company. Important Notice All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use.