User Guide

Slotted Shim
On distribution panels where a raised, rounded bead runs down the
center of the dead front; the slotted shim mounts over this bead;
primarily GE panels. Provides a flat surface to mount PanelSafe unit.
Available only in pairs.
1/2" Shim
On distribution panels where the body of each breaker extends out
beyond the level of the dead front. The 1/2" shim is used to raise the
surface where a PanelSafe unit is mounted, level with the body of
each breaker. Available only in pairs.
V-Notch Shim
Used on distribution panels that have a V-Notch extending down the
length of the dead front; primarily ITE panels. Available only in pairs.
Offset Brackets
Used in conjunction with a PanelSafe
™ unit when breakers are
recessed below the dead front and no area is available to mount a
PanelSafe unit by standard means. Available only in pairs.
Main Breaker/Large Frame Lockout Set
On large frame breakers where the handle thickness (size) and the
ability to mount a standard PanelSafe
™ unit is not applicable, a main
breaker lockout is used either separately, as shown at right, or in
conjunction with the main breaker brackets as shown below. Includes
one each: PS-MB, PS-BS, PS-MP.
Main Breaker Bracket
When a main breaker lockout cannot be directly attached to the dead
front because of extended breaker casing, a pair of main breaker
brackets must be used. The main breaker lockout is attached to the
bracket which is expanded and attached to the insides of both sides of
the panel. A brace (see below) and main breaker pin (see below) must
also be used. Main breaker brackets are sold in pairs only.
Main Breaker Brace
Used in conjunction with the main breaker bracket (shown above) this
brace is attached to the bracket which is then expanded and attached
to the insides of both sides of the panel. The assembly is positioned
below the breaker handle acting as a receptacle for the main breaker
pin (shown below).
Main Breaker Pin
A main breaker pin is used only with the main breaker lockout to
lockout a large frame breaker.
PS-SH3
PS-SH4
PS-OB1
PS-OB2
PS-MB
PS-BS
PS-MP
PS-BK
1/2"
1/8"
3-1/2"
2"
PS-SH2
1/8"