User Guide

Printed in U.S.A.
©3M 2006 70-0707-3821-9 (3/06)
Recycled Paper
40% pre-consumer
10% post-consumer
Technical Bulletin
Polyurethane Protective Tape
- 6 -
Shipping and Storage
No special/hazardous labeling or packaging required and no regulations for air, ground or water
shipment for this product.
Keep film in a clean area, away from excessive moisture and out of direct sunlight. Store rolls in
the shipping carton. Return partially used rolls to the shipping carton.
Shelf life: Two (2) years from date of manufacture.
Safety and Regulatory
• 3M™ Polyurethane Protective Boots are 100% solids and contain no hazardous air pollutants
(HAPs), volatile organic components (VOCs) or materials restricted by regulations or law.
• Polyurethane Protective Boots meet US Federal and California regulations for landfillable
materials. The product is potentially recyclable.
• Packaging materials meet US Federal and California regulations for landfillable materials and are
recyclable or reusable.
• This product is considered to be an article that does not release or otherwise result in exposure to
a hazardous chemical under normal use conditions.
If the 3M product is proved to be defective, THE EXCLUSIVE REMEDY, AT 3M’S OPTION, SHALL
BE TO REFUND THE PURCHASE PRICE OF OR TO REPAIR OR REPLACE THE DEFECTIVE
3M PRODUCT. 3M shall not otherwise be liable for loss or damages, whether direct, indirect, special,
incidental, or consequential, regardless of the legal theory asserted, including, but not limited to, contract,
negligence, warranty, or strict liability.
Limitation of Remedies
and Liability
This product was manufactured under a 3M quality standard registered under ISO9001 standards.
ISO9001
3M MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. User is responsible for determining whether the 3M product is fit for a particular purpose
and suitable for user’s method of application. Please remember that many factors can affect the use and
performance of a 3M product in a particular application. The materials to be bonded with the product, the
surface preparation of those materials, the product selected for use, the conditions in which the product is
used, and the time and environmental conditions in which the product is expected to perform are among
the many factors that can affect the use and performance of a 3M product. Given the variety of factors
that can affect the use and performance of a 3M product, some of which are uniquely within the user’s
knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit
for a particular purpose and suitable for the user’s method of application.
Important Notice
Refer to Product Label and Material Safety Data Sheet for health and safety information before using this
product. For additional health and safety information, call 1-800-364-3577 or [phone].
Precautionary
Information
In the U.S., call toll free 1-800-235-2376 or fax [phone] or 651-737-2171. For U.S. Military, call
1-866-556-5714. If you are outside of the U.S., please contact your nearest 3M office or one of the
following branches:
Australia Austria Brazil Canada
61-2-498-9711 tel [phone] tel [phone] tel [phone] ext. 6018 tel
61-2-498-9710 fax [phone] fax [phone] fax [phone] fax
China Denmark France Germany
86-21-62753535 tel [phone] tel [phone] tel [phone] tel
86-21-62190698 fax [phone] fax [phone] fax [phone] fax
Italy Japan Korea Netherlands
02-7035-2177 tel [phone] tel [phone] tel [phone] tel
02-7035-2125 fax [phone] fax [phone] fax [phone] fax
South Africa Spain Switzerland United Kingdom
11-922-9111 tel [phone] tel [phone] tel [phone] tel
11-922-2116 fax [phone] fax [phone] fax [phone] fax
For Additional
Information
3
Aerospace and Aircraft Maintenance Division
3M Center, Building 223-1N-14
St. Paul, MN 55144-1000
www.3M.com/aerospace