Digital Projector DX70i Operator’s Guide Important Note Before using this product, please read the “Product Safety Guide” and related manuals to ensure the proper use of this product. After reading them, store them in a safe place for future reference. 3M Projection Systems 6801 River Place Boulevard Austin, Texas 78726-9000 www.3m.com/meetings Digital Projector Operator’s Guide © 3M 2008.
Contact 3M In the event of missing and/or damaged equipment, or technical questions, the following information can help in the completion of the installation. Customer Service – 1-800-328-1371 (US) The 3M logo, and 3M are trademarks of the 3M Company. Important Notice All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed.
M™ Digital Projector DX70i Table of Contents Table of Contents ......................................................................................... 1 Usage Notice................................................................................................ 2 Precautions...........................................................................................................2 Important Note......................................................................................................
Usage Notice 3M™ Digital Projector Precautions Follow all warnings, precautions and maintenance as recommended in this user’s guide to maximize the life of your unit. Warning- Do not look into the projector’s lens when the lamp is on. The bright light may hurt your eyes. Warning- To reduce the risk of injury to the eyes, do not look directly into the laser light on the remote control and do not point the laser light into anyone eyes.
3M™ Digital Projector DX70i Usage Notice Use under the following conditions: - In extremely hot, cold or humid environments. - In areas susceptible to excessive dust and dirt. 1HDU DQ\ DSSOLDQFH WKDW JHQHUDWHV D VWURQJ PDJQHWLF ¿HOG - In direct sunlight. Important Note 1. This product will detect the life of the lamp itself. Please be sure to change the lamp when it shows warning messages. 2.
Introduction 3M™ Digital Projector Product Features This product is a XGA single chip 0.7” Darkchip3 DLP® projector. Outstanding features include: True XGA, 1024 x 768 addressable pixels Texas Instruments Single chip DLP® Technology NTSC/NTSC4.
3M™ Digital Projector DX70i Introduction Package Overview This projector comes with all the items shown below. Check to make sure your unit is complete. Contact your dealer immediately if anything is missing. Due to the difference in applications for each country, some regions may have different accessories. Projector with lens cap Power Cord VGA Cable 1.8m Composite Video Cable 1.8m USB Cable 1.8m RS232 Cable 1.8m S-Video Cable 1.
Introduction 3M™ Digital Projector Product Overview Main Unit 1 2 3 5 4 7 6 5 7 2 DVI-D VGA1-In Audio-In VGA-Out S-Video VGA2-In / SCART Audio-In Video RJ45 Audio-In Audio-Out RS-232 USB 9 8 4 1. 2. 3. 4. 5. 6. 7. 8. 9. 6 Control Panel Zoom Lever Focus Ring Elevator Button (one on each side) Elevator Foot (one on each side) Zoom Lens IR Receivers Power Socket Connection Ports © 3M 2008. All Rights Reserved.
3M™ Digital Projector DX70i Introduction Control Panel 1 1 5 11 9 MENU SOURCE RE-SYNC 10 7 POWER/ STANDBY 6 8 5 3 TEMP POWER LAMP 4 2 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. IR Receiver Power/Standby LED Temp Indicator LED Lamp Indicator LED Keystone +/Re-Sync Power/Standby Four Directional Select Keys Menu (On/Off) Source Select Enter © 3M 2008. All Rights Reserved.
Introduction 3M™ Digital Projector Connection Ports 4 1 DVI-D VGA-Out 8 2 VGA1-In VGA2-In / SCART 99 3 Audio-In Audio-In 10 6 5 S-Video Audio-Out 11 7 Audio-In Video RS-232 12 RJ45 USB 14 15 13 1. DVI-D Input Connector (PC Digital/HDTV/HDCP Input) 2. VGA1-In Connector (PC Analog signal/HD/Component Video Input) 3. Audio Input Connector (for DVI-D or VGA1-In) 4. S-Video Input Connector 5. Audio Input Connector (for S-Video or Composite) 6. Composite Video Input Connector 7.
3M™ Digital Projector DX70i Introduction Remote Control with Mouse Function and Laser Pointer 15 16 1 17 2 18 3 19 4 1. 2. 3. 4. 5. 6. 7. 8. 9. 5 10. 11. 12. 20 6 21 7 22 8 9 23 24 10 25 11 26 12 27 14 © 3M 2008. All Rights Reserved. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27.
Installation 3M™ Digital Projector Connecting the Projector Connect the Computer/Notebook USB RS232 DVI VGA 5 7 3 4 6 2 1 Due to the difference in applications for each country, some regions may have different accessories. 8 Audio Output (For Active Speakers) 1....................................................................................................Power Cord 2.....................................................................................................USB Cable 3.........
3M™ Digital Projector DX70i Installation Connect the Video DVD Player, Set-top Box, HDTV receiver S-Video Output 4 3 3 6 2 Video Output 8 7 5 1 9 Due to the 3 difference in applications for each country, some regions may have different accessories. 10 Audio Output (For Active Speakers) DVD Player, Set-top Box, HDTV receiver 1....................................................................................................Power Cord 2......................................................
Installation 3M™ Digital Projector Powering On/Off the Projector Powering On the Projector Test Pattern 1. Remove the lens cap. n 2. Ensure that the power cord and signal cable are securely connected. The Power LED will turn red. 3. Turn on the lamp by pressing “Power/Standby” button on the control panel.o And the Power LED will turn green. 4. Turn on your source (computer, notebook, video player, etc.).
3M™ Digital Projector DX70i Installation Powering Off the Projector 1. Press the “Power/Standby” button to turn off the projector lamp; you will see a message displayed on the projector’s screen. Press the “Power/ 6WDQGE\´ EXWWRQ DJDLQ WR FRQ¿ UP 2. The cooling fans continue to operate for about 2 minutes for FRROLQJ F\FOH DQG WKH 3RZHU /(' ZLOO À DVK UHG :KHQ WKH 3RZHU /(' VWRSV À DVKLQJ WKH SURMHFWRU KDV HQWHUHG VWDQGE\ mode.
Installation 3M™ Digital Projector Adjusting the Projected Image Adjusting the Projector Image Height The projector is equipped with elevator feet for adjusting the image height. To raise the image: 1. Press the elevator buttons n. 2. Raise the image to the desired height angle o, then release the button to lock the elevator feet into position. 3. Use screw in feet p WR ¿ QH WXQH WKH GLVSOD\ DQJOH To lower the image: 1. Press the elevator buttons. 2.
3M™ Digital Projector DX70i Installation Adjusting the Projector Zoom / Focus You may turn the zoom lever to zoom in or out. To focus the image, rotate the focus ring until the image is clear. The projector will focus at distances from 3.3 to 40.0 feet (1.0 to 12.2 meters). Zoom Lever Focus Ring Adjusting Projection Image Size ag on al 300.2" (762.5cm) Height Di 221.5" (562.5cm) 172.2" (437.5cm) 123.0" (312.5cm) Width 73.8" (187.5cm) 24.6" (62.5cm) 20.5" (52.1cm) 61.5" (156.3cm) 102.5" (260.
User Controls 3M™ Digital Projector Control Panel & Remote Control There are two ways for you to control the functions: Remote Control and Control Panel. Using the Control Panel MENU SOURCE RE-SYNC TEMP LAMP Power/ Standby Refer to the “Power On/Off the Projector” section on pages 12-13. Source Press “Source” to select an input signal. Menu Turns the menu On or Off. Four Directional Select Keys Use Enter / Keystone Re-Sync 16 POWER POWER/ STANDBY to navigate through the menus.
3M™ Digital Projector DX70i User Controls Using the Remote Control Power Refer to the “Power On/Off the Projector” section on pages 12-13. Re-Sync Automatically synchronizes the projector to the input source. Keystone Adjusts image distortion caused by tilting the projector (±16 degrees). Display Format Display the “Aspect Ratio” section of the onscreen display menu to select the desired aspect ratio.
User Controls 18 3M™ Digital Projector Clear Clear your selection. Enter &RQ¿UP \RXU LWHP VHOHFWLRQ Source Lock Select auto detection all connector ports or lock current connector port. (see page 28 for more) Video Choose composite video source. S-Video Choose S-Video source. VGA1 Choose primary VGA-In source. VGA2 Choose secondary VGA-In or SCART source. DVI Choose DVI-D source. © 3M 2008. All Rights Reserved.
3M™ Digital Projector DX70i User Controls On Screen Display Menus The Projector has multilingual On Screen Display menus that allow you to make image adjustments and change a variety of settings. The projector will automatically detect the source. How to Operate 1. To open the OSD menu, press “Menu” on the Remote Control or Control Panel. 2. When OSD is displayed, use keys to select any item in the main menu. While making a selection on a particular page, press key to enter sub menu. 3.
User Controls 3M™ Digital Projector Menu Tree Image-I Display Mode Brightness PC/Photo/Video/sRGB/User Contrast White Peaking Colour Temperature Video Low/Mid./High/sRGB/User Saturation Sharpness Image-II Computer Frequency Computer Phase Computer Computer H Position V Position Degamma 16:9 Ver.
3M™ Digital Projector DX70i User Controls Image-I Display Mode There are many factory presets optimized for various types of images. PC: For computer or notebook. (brightest image) Photo: For optimum colour at high brightness. Video: For playing video in a bright environment. sRGB: For standard PC colour. (best colour reproduction) User: Memorize user’s settings. Brightness Adjust the brightness of the image. Press the to darken image. Press the Contrast to lighten the image.
User Controls 3M™ Digital Projector Colour Temperature Adjusts the colour temperature. At higher temperature, the screen looks colder; at lower temperature, the screen looks warmer. Each display mode has its own colour temperature and can memorize user’s selection. For example: Display mode PC Photo Video sRGB User Colour Temp. sRGB Low User High Mid. Default setting Mid.
3M™ Digital Projector DX70i User Controls Image-II Frequency “Frequency” changes the display data frequency to match the frequency of your computer’s graphic card. If you experience a YHUWLFDO À LFNHULQJ EDU XVH WKLV IXQFWLRQ WR PDNH DQ DGMXVWPHQW Phase “Frequency”, “Phase”, “H Position” and “V Position” functions are only supported under Computer mode.
User Controls 3M™ Digital Projector LBX: This format is for non-16x9, letterbox source and for users who use external 16x9 lens to display 2.35:1 aspect ratio using full resolution. Display area Picture area Input Signal Display on Screen Ver. Shift (16:9) Ver. Shift (16:9): Image Position at window mode will also be moved accordingly. 24 Adjust the image position up or down, when you select the aspect ratio of 16:9. Press the Press the to move the image down. to move the image up.
3M™ Digital Projector DX70i User Controls Colour Colour Full Range: Adjust the Red, Green and Blue color for all screen. Enhance Individual: Adjust the Red, Green, Blue, Yellow, Cyan and Magenta colors for advanced adjustment of the individual colors. Enhance Red Full Range: + Red - Red + Red When you adjust the colour setting item, the colour temperature will be set as “User” automatically. And this set “User” is the same for all display mode.
User Controls 3M™ Digital Projector Different color setting will be memorized at 4 different source groups. But they will be same under same source. DVI/VGA Component-p (480p/576p/720p/1080i) Component-i (480i/576i) Video / S-Video When we adjust color setting the current color temperature will be memorized before it auto switch to “User”. Because the memorized color temperature will be a base of “User”. For example: 1.) Colour Temperature is High. 2.
3M™ Digital Projector DX70i User Controls Language Language Choose the multilingual OSD menu. Use the your preferred language. or key to select 3UHVV ³(QWHU´ WR ¿ QDOL]H WKH VHOHFWLRQ © 3M 2008. All Rights Reserved.
User Controls 3M™ Digital Projector Management Menu Location Choose the menu location on the display screen. Projection Front-Desktop The factory default setting. Front-Ceiling When you select this function, the projector turns the image upside down for ceiling-mounted projection. Rear-Desktop When you select this function, the projector reverses the image so you can project from behind a translucent screen.
3M™ Digital Projector DX70i User Controls Zoom Press the Press the Volume to reduce the size of an image. to magnify an image on the projection screen. Press to decrease the volume. Press to increase the volume. Information To display source information on the screen. Reset Choose “Enter” to return the adjustments and settings to the factory default values. © 3M 2008. All Rights Reserved.
User Controls 3M™ Digital Projector Management PIP Choose “On” to select on the PIP screen, choose “Off” to select off the PIP screen. PIP Position Choose the PIP screen position on the display screen. Top-Left Top-Right Bottom-Left Bottom-Right PIP Source Switch Press “Enter” to switch PIP screen source.
3M™ Digital Projector DX70i User Controls 3M: The default startup screen of 3M projector. User: Use memorize picture from “Logo Capture” function. Logo Capture Press “Enter” to immediately capture a picture what on the display screen. Security Settings Ŷ First Time: 1. Press “Enter” to set password. 7KH 3DVVZRUG LV GLJLWV '()$8/7 9$/8( LV ³ ´ ¿ UVW time) 3.
User Controls 3M™ Digital Projector LAN Press “Enter” to apply LAN settings. If the connection is successful, the OSD display will show the following dialogue box. Network State: To display network information. DHCP: Enable: Assign an IP address to the projector from the DHCP server automatically. Disable: Assign an IP address manually. IP Address: Select an IP address. Subnet Mask: Select subnet mask number. Gateway: Select the default gateway of the network connected to the projector.
3M™ Digital Projector DX70i User Controls How to use web browser to control your projector 1. Fill in a new IP, a subnet mask, a gateway and a DNS in the dialogue box. 2. Then choose apply and press “Enter” button to effectuate the con¿ JXUDWLRQ SURFHVV 3. Open your web browser and type in from the OSD LAN screen then the web page will display as below: When you used the projector IP address, you will can not link to your service server. 4. Open “Control Panel” to control your projector.
User Controls 3M™ Digital Projector For example: Use Microsoft Internet Explorer (IE) web browser to control the projector , the IP address is http: // 10.0.50.100. Step 1: Find an IP Address (10.0.50.100) from LAN function of projector. Step 2: Select apply and press “Enter” button to submit function or press “menu” key to exit. Step 3: To open Network Connections, click Start, click Control Panel, click Network and Internet Connections, and then click Network Connections.
3M™ Digital Projector DX70i User Controls Step 7: The Local Area Network (LAN) Setting dialog box appears, In the Proxy Server area, cancel the Use a proxy server for your LAN check box., then click “OK” button twice. Step 8: Open your IE and type in the IP address of 10.0.50.100 in the URL then press “Enter” key. The web page will display as below: Step 9: Open “Control Panel” to control your projector. © 3M 2008. All Rights Reserved.
User Controls 3M™ Digital Projector Lamp & Power STD Mode Choose “On” to dim the projector lamp which will lower power consumption and extend the lamp life by up to 130%. Choose “Off” to return to BRIGHT mode. High Altitude Choose “On” to turn on High Altitude mode. Operates the fans at full speed continuously to allow for proper high altitude cooling of the projector. Auto Power Off Sets the countdown timer interval. The countdown timer will start, when there is no signal being sent to the projector.
3M™ Digital Projector DX70i Appendices Troubleshooting If you experience trouble with the projector, refer to the following information. If the problem persists, please contact your local reseller or service center. Problem: No image appears on screen Ensure all the cables and power connections are correctly and securely connected as described in the “Installation” section. Ensure the pins of connectors are not crooked or broken. Check if the projection lamp has been securely installed.
Appendices 3M™ Digital Projector 5. Select the “Change” button under the “Monitor” tab. 6. Click on “Show all devices.” Next, select “Standard monitor types” under the SP box; choose the resolution mode you need under the “Models” box. If you are using a Notebook: 1. First, follow the steps above to adjust resolution of the computer. 2. Press the toggle output settings.
3M™ Digital Projector DX70i Appendices Problem: Image is out of focus Adjust the Focus Ring on the projector lens. Make sure the projection screen is between distance 3.3 to 40.0 feet (1.0 to 12.2 meters) from the projector. (see page 15) Problem: The image is stretched when displaying 16:9 DVD The projector automatically detects 16:9 DVD and adjusts the aspect ratio by digitizing to full screen with 4:3 default setting.
Appendices 3M™ Digital Projector Problem: Message Reminders Fan fail: Over temperature: Power Off: Replace the lamp: 40 © 3M 2008. All Rights Reserved.
3M™ Digital Projector DX70i Appendices Replacing the Lamp The projector keeps track of the lamp usage. It will show you a warning message: Warning: Lamp compartment is hot! Allow 30 minutes to cool down before changing lamp! When you see this message, change the lamp as soon as possible. Make sure the projector has cooled down for at least 30 minutes before changing the lamp.
Appendices 3M™ Digital Projector Compatibility Modes (ANALOG) Resolution V.Frequency (Hz) H.Frequency (kHz) V.Frequency (Hz) H.Frequency (kHz) VESA VGA 640 x 350 70 31.5 70 31.5 VESA VGA 640 x 350 85 37.9 85 37.9 VESA VGA 640 x 400 85 37.9 85 37.9 VESA VGA 640 x 480 60 31.5 60 31.5 VESA VGA 640 x 480 72 37.9 72 37.9 VESA VGA 640 x 480 75 37.5 75 37.5 VESA VGA 640 x 480 85 43.3 85 43.3 VESA VGA 720 x 400 70 31.5 70 31.5 VESA VGA 720 x 400 85 37.
3M™ Digital Projector DX70i Appendices Ceiling Mount Installation damage resulting from incorrect installation will invalidate the warranty. Screw type: M3 Maximum screw length: 10mm Minimum screw length: 8mm If you buy the ceiling mount from another manufacturer, please ensure that there is at least 10cm distance between the bottom cover of the projector and the ceiling. 126.00 63.00 40.00 111.00 Please note that 1.
Appendices 3M™ Digital Projector RS232 Protocol Function List --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Baud Rate : 9600 Data Bits: 8 Parity: None Stop Bits: 1 Flow Control : None UART16550 FIFO: Disable ----------------------------------------------------------------------------------------------------------------------
3M™ Digital Projector DX70i Appendices READ from projector --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------232 ASCII Code HEX Code Function Projector Return Description ---------------------------------------------------------------------------------------------------------------------------------------------------------------
Appendices 3M™ Digital Projector RS232 Connector VGA-In Connector 3 1 2 Name I/O (From Projector Side 1 TXD OUT 2 RXD IN 3 GND — Pin no. 46 5 4 10 9 8 15 14 13 Pin no. 3 2 7 12 1 6 11 Spec. 1 R(RED)/Cr 2 G(GREEN)/Y 3 B(BLUE)/Cb 4 NC 5 GND 6 GND 7 GND 8 GND 9 DDC 5V 10 HOT–DET 11 NC 12 DDC Date 13 HS/CS 14 VS 15 DDC Clock © 3M 2008. All Rights Reserved.
3M™ Digital Projector DX70i Appendices Regulation & Safety notices This appendix lists the general notices of your Projector. FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Appendices 3M™ Digital Projector Operation conditions This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1.this device may not cause harmful interference, and 2.this device must accept any interference received, including interference that may cause undesired operation. Notice: Canadian users This Class B digital apparatus complies with Canadian ICES-003.