User Guide

Additional Product Information
There are a series of sensors located within the doors of the elevator that send signals between the two doors when they are
open; if the signal is interrupted by a person or object, the doors will reopen so that someone is not trapped between the
doors as they close. The electronics that control this operation are mounted on a ½ in. wide by 7 ft. long circuit board that
spans the length of the door opening, with sensors mounted on both sides—one side sending a signal, the other side
receiving the signal. A protective cover fits over this thin circuit board (which allows the signal to transmit through it),
though it could flex and come in contact with the components mounted on the circuit board and possibly damage them. To
help avoid this problem, 3M
™
Bumpon
™
Protective Products are attached directly onto the circuit board. Since they have a
higher profile than the components, only the Bumpon protector will be contacted if the cover is flexed. These circuit boards
are also mounted in a position set back from the actual opening so they cannot be tampered with.
• For spacer applications: 3M
™
Bumpon
™
Protective Products SJ-5003, SJ-5027, SJ-5012, SJ-5008, and SJ-5018.
• For electronic equipment assembly applications: 3M
™
Bumpon
™
Protective Products SJ-5012, SJ-5023, SJ-5518, SJ-5523,
SJ-5744, SJ-5003, SJ-5001, SJ-5302, SJ-5303, and SJ-5312.
• Rollstock: 3M
™
Bumpon
™
Protective Products SJ-5816, SJ-5916, SJ-5808, SJ-5904, and SJ-6032. Protectors are
commonly used in die-cut form for both spacer and foot applications in electronics and equipment assembly areas.
SIC Code
3534 – Elevators and Moving Stairways
Key Decision Makers
Design Engineers, Maintenance Engineers, Production Engineers
Industrial Business
Building 21-1W-10, 900 Bush Avenue
St. Paul, MN 55106
© 3M 2005
Printed in the USA
sj5003.pdf
To request additional product information or to arrange for sales assistance, call
1-800-362-3550.
Address correspondence to: 3M Industrial Business Customer
Response Center, Building 21-1W-10, 900 Bush Avenue, St. Paul, MN 55106. Our
fax number is 651-733-9175. In Canada,
phone: [phone]. In Puerto Rico,
phone: [phone]. In Mexico, phone: [phone].
Unless stated otherwise in 3M’s product literature, packaging inserts or product
packaging for individual products, 3M warrants that each 3M product meets the
applicable specifications at the time 3M ships the product. Individual products may
have additional or different warranties as stated on product literature, package inserts
or product packages. 3M MAKES NO OTHER WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE OR ANY IMPLIED WARRANTY ARISING OUT OF A COURSE OF
DEALING, CUSTOM OR USAGE OF TRADE. User is responsible for determining
whether the 3M product is fit for a particular purpose and suitable for user’s
application. If the 3M product is defective within the warranty period, your exclusive
remedy and 3M’s and seller’s sole obligation will be, at 3M’s option, to replace the
product or refund the purchase price.
Except where prohibited by law, 3M and seller will not be liable for any loss or
damage arising from the 3M product, whether direct, indirect, special, incidental, or
consequential, regardless of the legal theory asserted, including warranty, contract,
negligence, or strict liability.
All statements, technical information and recommendations contained in this
document are based upon tests or experience that 3M believes are reliable. However,
many factors beyond 3M’s control can affect the use and performance of a 3M
product in a particular application, including the conditions under which the product
is used and the time and environmental conditions in which the product is expected
to perform. Since these factors are uniquely within
the user’s knowledge and control,
it is essential that the user evaluate the 3M product to determine whether it is fit for a
particular purpose and suitable for the user’s method of application.
For Additional Information
Product Use
Warranty and
Limited Remedy
Limitation of Liability