User Guide

Process
The 3M
™
Protective Tape 2AU23B/UV is applied manually prior to shipping or may be applied at the job site. If the tape is
applied at the job site, the surface should be clean and free from dirt, dust, or other contaminant’s. The 3M protective tape
2AU23B/UV should be applied at a temperature no less than 60 degrees fahrenheit for optimal performance. The contractor
removes the film from the window after the windows are installed and the homeowner has closed on the house.
Related Products
For UV exposure up to 90 days, 3M™ Protective Tapes 2AU26B/UV, 31U23C/UV or 31U26C/UV may also be used .
Target Customer
Manufacturers of Windows
SIC Code
2431 – Millwork, Door, Window Units
Key Decision Makers
Production Managers
Operators at the manufacturer
Purchasing
© 3M 2005
Printed in USA
Windglspt.pdf
To request additional product information or to arrange for sales assistance, call toll free
1-800-241-2031 or 828-465-3053.
Address correspondence to: 3M/PolyMask, 500
Thornburg Dr., P.O. Box 309, Conover, NC 28613. Our fax number is 1-800-672-3038
or 828-465-2404.
Unless stated otherwise in other product literature, packaging inserts or product
packaging for individual products, PolyMask Corporation warrants that each PolyMask
Corporation product meets the applicable specifications at the time PolyMask
Corporation ships the product. Individual products may have additional or different
warranties as stated on product literature, package inserts, or product packages.
POLYMASK CORPORATION MAKES NO OTHER WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITYOR FITNESS FOR APARTICULAR PURPOSE OR ANY
IMPLIED WARRANTYARISING OUT OFACOURSE OF DEALING, CUSTOM
OR USAGE OFTRADE. User is responsible for determining whether the PolyMask
Corporation product is fit for a particular purpose and suitable for user’s application. If
the PolyMask Corporation product is defective within the warranty period, your
exclusive remedy and 3M’s and PolyMask Corporation’s sole obligation will be, at
PolyMask Corporation’s option, to replace the product or refund the purchase price.
Except where prohibited by law, 3M and PolyMask Corporation will not be liable for
any loss or damage arising from the PolyMask Corporation product, whether direct,
indirect, special, incidental, or consequential, regardless of the legal theory asserted,
including warranty, contract, negligence, or strict liability.
All statements, technical information and recommendations contained in this
document are based upon tests or experience that PolyMask Corporation and 3M
believe are reliable. However, many factors beyond the control of PolyMask
Corporation and 3M can affect the use and performance of a PolyMask product in a
particular application, including the conditions under which the product is used and
the time and environmental conditions in which the product is expected to perform.
Since these factors are uniquely within
the user’s knowledge and control, it is essential
that the user evaluate the
PolyMask product to determine whether it is fit for a
particular purpose and suitable for the user’s method of application.
ForAdditional Information
Product Use
Warranty and
Limited Remedy
Limitation of Liability
Industrial Business
Building 21-1W-10, 900 Bush Avenue
St. Paul, MN 55106