ANSI Z359.14 OSHA 1926:502 OSHA 1910:140 ANSI Z359.12 Connected Order Picker SRD System User Instructions 5908581 Rev. A 1 3100273 A 8548924 A B A B C 5.25 in (13.3 cm) 3.0 in (7.62 cm) 4.25 in (10.8 cm) A C C B A lbs (kg) 0.56 lbs (0.25 kg) B 3101737 C 2000037 E F LL 11.0 ft (3.35 m) D LL lbs (kg) 2.53 lbs (1.15 kg) D E F lbs (kg) 6.25 in (15.87 cm) 3.5 in (8.90 cm) 1.37 in (3.50 cm) 0.45 lbs (0.
1 2 3 E D C A B C F B A B E A C 3 A B C H FF FC FC DD SF FC = FF+DD+SF 2
4 Web SRD: 130-310 lbs (59-140 kg) A A B <6 ft (1.8 m) 6 ft (1.8 m) 7 ft (2.1 m) 8 ft (2.4 m) ≥9 ft (2.7 m) 8 ft (2.4 m) 0 ft (0m) 2.6 ft (0.8 m) 3.9 ft (1.2 m) 5.1 ft (1.6 m) 10 ft (3 m) 0 ft (0m) 3.3 ft (1.0 m) 4.8 ft (1.5 m) 6.1 ft (1.9 m) 15 ft (4.6 m) 0 ft (0m) 4.5 ft (1.4 m) 6.6 ft (2.0 m) 8.2 ft (2.5 m) 20 ft (6.1 m) 0 ft (0m) 5.5 ft (1.7 m) 8 ft (2.4 m) 9.9 ft (3.0 m) 25 ft (7.6 m) 0 ft (0m) 6.4 ft (1.9 m) 9.1 ft (2.8 m) 11.3 ft (3.
7 8 B 9 1 2 A B A B 3 4 4 A
9 5 6 A X 7 8 9 10 11 A C 5
10 1 2 3 4 6
11 1 2 A D 12 A 7
13 C B A B A A B D C B D 14 A A B B C C D MFG DATE LOT # MFG ID MN#2000037 5171 LBS (23Kn) FCC ID: DGFPSD3100273 IC: 458A - PSD3100273 D E E 8
SAFETY INFORMATION EN Please read, understand, and follow all safety information contained in these instructions prior to the use of this Connected Order Picker Self-Retracting Lifeline. FAILURE TO DO SO COULD RESULT IN SERIOUS INJURY OR DEATH. These instructions must be provided to the user of this equipment. Retain these instructions for future reference. Intended Use: The Connected Order Picker Self-Retracting Lifeline is intended for use as part of a complete personal fall protection system.
;;Prior to installation of this equipment, record the product identification information from the ID label in the “Inspection and Maintenance Log” (Table 3) located at the back of this manual. PRODUCT DESCRIPTION: Figure 1 illustrates the 3M™ DBI-SALA® Nano-Lok™ Connected Order Picker System. The components of the system work together to create an electronic field that detects the user’s presence within the order picker vehicle.
Table 1 – Specifications Nano-Lok Self-Retracting Device (Figure 2.2): Figure Reference Component Materials A Lifeline Dyneema webbing B Energy Absorber Polyester webbing C Housing Blue super-tough nylon plastic D Swivel Alloy steel E Cab Mount Alloy steel Connected Aluminum Carabiner (Figure 2.
1.0 APPLICATION 1.1 PURPOSE: The Connected Order Picker System is designed to provide workers with real-time feedback on anchor status and to prevent the fall of the user through use of this feedback system alongside a Self-Retracting Device (SRD). When used properly, the Connected Order Picker System is designed to eliminate or substantially reduce the risk of a fall which would otherwise lead to injury or death.
2.0 SYSTEM REQUIREMENTS 2.1 RESCUE PLAN: When using this equipment and connecting subsystem(s), the employer must have a rescue plan and the means at hand to implement and communicate that plan to users, authorized persons3, and rescuers4. A trained, onsite rescue team is recommended. Team members should be provided with the equipment and techniques to perform a successful rescue. Training should be provided on a periodic basis to ensure rescuer proficiency. 2.
3.0 INSTALLATION ;;Installation of the Connected Order Picker System must be supervised by a Qualified Person . The order picker vehicle 1 must be certified by a Competent Person as meeting the criteria for a Certified Anchorage, or that it is capable of supporting the potential forces that could be encountered during a fall. 3.1 PLANNING: Plan your fall protection system prior to installation of the Connected Order Picker System.
3. A successful pairing will be indicated by a green confirmation pattern on the Feedback Lights and an audible chirp from the Sensor Box. 4. If a pairing failure occurs, repeat the pairing procedure. Pairing failure is often caused by the gate lock actions not being completed within the two-second timeframe. If pairing failure continues to happen, check the battery of the Carabiner.
6.0 MAINTENANCE, SERVICE, and STORAGE 6.1 CLEANING: Periodically clean the Connected Order Picker System’s metal components with a soft brush, warm water, and a mild soap solution. Ensure parts are thoroughly rinsed with clean water. Cleaning procedures for the SRD are as follows: • Periodically clean the exterior of the SRD using water and a mild soap solution. Position the SRD so excess water can drain out. Clean labels as required. • Clean the Lifeline with water and mild soap solution.
Table 3 – Inspection and Maintenance Log Inspection Date: Inspected By: Components: Inspection: User Connected Sensor Box (Figure 2.1) Inspect the Housing (D), Adjustment Clamp (E), and Pairing Button (F) for damage: Look for cracks, dents, and deformities. (See Section 1 for Inspection Frequency) Competent Person1 Inspect the lens for smudges or dust that could interfere with user detection. Ensure that the Adjustment Clamp and its adjustment bolt move freely and secure properly.
U.S. PRODUCT WARRANTY, LIMITED REMEDY AND LIMITATION OF LIABILITY WARRANTY: THE FOLLOWING IS MADE IN LIEU OF ALL WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Unless otherwise provided by applicable law, 3M fall protection products are warranted against factory defects in workmanship and materials for a period of one year from the date of installation or first use by the original owner.
