User's Instructions

3M Confidential
1 Foreword
Please read, understand, and follow all safety information contained in these instructions prior to
the use of the Safety Hub and Headtop Peripheral system. If you have questions regarding these
products, contact 3M Technical Service. Retain these User Instructions for future reference.
Explanation of Signal Words
CAUTION: Indicates a hazardous situation which, if not avoided, could result in minor or moderate
injury and/or property damage.
NOTE: Indicates important information a system user should be aware of.
NOTICE: Indicates a situation which, if not avoided, could result in property damage.
WARNING: Indicates a hazardous situation which, if not avoided, could result in serious injury or
death.
1.1 List of Warnings within These User Instructions
! WARNING
1. The 3M™ Connected PPE system components are not intrinsically safe. Do not use in flammable or
explosive atmospheres. Doing so may result in serious injury or death.
2. To reduce the risks associated with fire and explosion:
a. Always replace the battery with the correct type as identified by in these User Instructions
or by 3M personnel
b. Do not open, crush, incinerate, or heat the battery above 100°C (212°F)
3. To reduce the risks associated with inhalation of contaminants:
a. Proper selection, training, use, and appropriate maintenance are essential in order for the
product to help protect the wearer from certain airborne contaminants. Failure to follow
all instructions on the use of these respiratory protection products and/or failure to
properly wear the complete product during all periods of exposure may adversely affect
the wearer’s health, lead to sever or life-threatening illness or permanent disability. For
suitability and proper use follow local regulations, refer to all information supplied,
contact a safety professional, or 3M representative – 1-800-243-4630.
4. To reduce the risks associated with exposure to workplace hazards:
a. Always inspect the Headtop Peripheral, including carrier, for damage before each use. If
any part of the system is damaged, replace damaged components before use. Consult
Headtop User Instructions for more information on proper inspection of Headtop.
b. Always clean the peripheral before each use. Wipe exposed surfaces with a damp cloth.
c. Follow all Safety Supervisor policies regarding Universal Headtop alerts.
5. The Safety Hub and Headtop Peripheral are used for supplemental alerting of a potentially
unsafe condition based on Safety Rules configured by Employer’s Industrial Hygienist or other
Safety Professional, and does not substitute for any integrated TR-600 alarms. Follow all
Safety Supervisor policies regarding Safety Hub alerts. Leave the contaminated area
immediately if any of the following conditions occur:
a. Any part of the system becomes damaged.