User's Instructions

5
Approved battery charger:
201718-XX
Power Supply (Low-power): 31004245
Power Supply (High-power): 31003969
Chargeur à pile approuvé:
201718-XX
Power Supply (Low-power): 31004245
Power Supply (High-power): 31003969
Battery
To maintain the Intrinsic Safety Listing,
regularly inspect this equipment per the
inspection procedures provided with the
equipment. Do not tamper with or
substitute components in any
manner. Charge the battery only with the
approved battery charger and only in
accordance with the charging instructions
provided.
Pour préserver la classification de sécurité
intrinsèque, cet équipement doit être
régulièrement inspecté selon les
procédures d'inspection opérationnelle
provenant du manufacturier. Aucune
modification ou substitution est permise.
N'utiliser que les piles du type indiqué dans
les instructions traitant sur installation des
piles.
Substitution of components may impair
intrinsic safety. To reduce the risk of
ignition of a flammable
atmosphere, change the battery only in a
non-hazardous area.
La substitution de composants peut
compromettre la sécurité intrinsèque. Afin
de prévenir le risque d'incendie dans une
atmosphère inflammable, ne changer les
piles que dans des endroits non
inflammables.
FCC/ISED Compliance
This device complies with Part 15 of the FCC Rules and with ISED’s license-exempt RSS's.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter
tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le
FCC ID: DGFPSDVC51
IC:458A-PSDVC51
Contains FCC ID: SSSBC127-X and IC:11012A-BC127, Bluetooth Certified 4.0 Audio module
NOTE: The Battery Charger has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct
the interference at the user’s own expense.