User Guide

Process
3M
™
Scotch-Weld
™
Hot Melt Adhesive 3762 LM or 3762 is applied to one surface with a 1/8” bead approximately 1/4”
inside the edge of the carton flap. The opposite flap is then hand pressed into place to securely hold the beverage cans
inside the carton. This operation is done at the end of the automatic in-line packaging operation. It is also done at the local
beverage distributor warehouse.
Related Products Advantages
3M
TM
Tape Pad 1026 Resealing loose carton flaps before delivery of beverage at commercial business.
3M
TM
Combining Tape 8468 Bundling of Carton Flaps During Packaging Process (For Fridge Packs)
3M
TM
Combining Tape 8484 Bundling of Carton Flaps During Packaging Process (For Fridge Packs)
3M
TM
Concrete Repair DP 600 Quick Setting Concrete Repair Caulk for Cracks in Warehouse Floors
SIC Code
2082 – Malt Beverages
2084 – Wines, Brandy and Brandy Spirits
2086 – Bottled and Canned Soft Drinks and Carbonated Waters
5181 – Beer and Ale Wholesale Distributors
5182 – Wine and Distilled Alcoholic Beverage Distributors
Key Decision Makers
Quality Control Manager, Warehouse Manager
Marketing Manager, Packaging Engineer
Industrial Business
Building 21-1W-10, 900 Bush Avenue
St. Paul, MN 55106
3M, Jet-melt and Polygun are trademarks of 3M
PPrriinntteedd iinn tthhee UUSSAA
EElleemmeenntt IIDD:: 330044996688
FBrpjm3762.pdf
© 3M 2004
To request additional product information or to arrange for sales assistance, call
1-800-362-3550.
Address correspondence to: 3M Industrial Business Customer
Response Center, Building 21-1W-10, 900 Bush Avenue, St. Paul, MN 55106. Our
fax number is 651-733-9175. In Canada,
phone: [phone]. In Puerto Rico,
phone: [phone]. In Mexico, phone: [phone].
Unless stated otherwise in 3M’s product literature, packaging inserts or product
packaging for individual products, 3M warrants that each 3M product meets the
applicable specifications at the time 3M ships the product. Individual products may
have additional or different warranties as stated on product literature, package inserts
or product packages. 3M MAKES NO OTHER WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE OR ANY IMPLIED WARRANTY ARISING OUT OF A COURSE OF
DEALING, CUSTOM OR USAGE OF TRADE. User is responsible for determining
whether the 3M product is fit for a particular purpose and suitable for user’s
application. If the 3M product is defective within the warranty period, your exclusive
remedy and 3M’s and seller’s sole obligation will be, at 3M’s option, to replace the
product or refund the purchase price.
Except where prohibited by law, 3M and seller will not be liable for any loss or
damage arising from the 3M product, whether direct, indirect, special, incidental, or
consequential, regardless of the legal theory asserted, including warranty, contract,
negligence, or strict liability.
All statements, technical information and recommendations contained in this
document are based upon tests or experience that 3M believes are reliable. However,
many factors beyond 3M’s control can affect the use and performance of a 3M
product in a particular application, including the conditions under which the product
is used and the time and environmental conditions in which the product is expected
to perform. Since these factors are uniquely within
the user’s knowledge and control,
it is essential that the user evaluate the 3M product to determine whether it is fit for a
particular purpose and suitable for the user’s method of application.
For Additional Information
Product Use
Warranty and
Limited Remedy
Limitation of Liability