User Guide

REFERENCE 18
8515
Welding Respirators Air Purifying/PAPR/SAR Elastomeric
Facepiece Respirators
PAPR
Loose-Fitting
Facepiece
Respirators
Airline Systems
8512/8212 8514/8214 2091 P100 2097 P100 7093 P100
3M
™
Fresh-air II
Supplied Air System
5
5
6100, 6200,
6300
6100DD, 6200DD,
6300DD
7501, 7502,
7503
3
7800 (S,M,L)
xicology. Vol II New York. John Wiley and Sons Inc., 1994. 3. Dual-mode head harness design adjusts easily so that the user has the option of wearing the respirator in either
d for applications where ozone and nuisance level organic vapors may be present. 3M recommended for ozone protection up to 10 times the OSHA PEL or applicable government
anic vapors refer to concentrations not exceeding the OSHA PEL, or applicable government occupational exposure limits whichever is lower. Do not use when concentrations of
3M
™
Speedglas
™
with
Adflo System
4
Respirator recommended when contaminants are above regulatory limits
WARNING
Positive Pressure Respirators
No respirator is capable of preventing all airborne contaminants from entering the wearer’s breathing zone. Respirators
help protect against certain airborne contaminants by reducing concentrations in the breathing zone to below the PEL
or other recommended exposure level. Misuse of respirators may result in overexposure to the contaminant and
cause sickness or death. For this reason, proper respirator selection, training, use, and maintenance are mandatory in order for the wearer
to be properly protected. Use of these respirators by untrained or unqualified persons, or use not in accordance with the instructions, may
adversely affect product performance and result in sickness or death. These respirators are to be used only by qualified persons who are
properly trained in their use and maintenance, and only in accordance with their operating and maintenance manuals. Each person using
these products must first read and understand the operator’s manual. L-series faceshields help provide limited face and eye protection.
Because faceshields and welding shields can be raised from the normal position, ANSI Z87.1-2003 states that safety spectacles or goggles
must be used in conjunction with these respirators. Misuse may result in face and/or eye injury. For proper use, see supervisor, product
instructions and warnings or call 3M OH&ESD Technical Service at 1-800-243-4630. In Canada, call 1-800-367-4414.