User Guide
Scotch
®
ATG Adhesive Systems...
versatility, convenience, and speed
Scotch
®
ATG Applicator 700 for 3/4",
1/2", and 1/4" wide tape
(1/4" adapter purchased separately).
Scotch
®
ATG Applicator 714 for
1/4" wide tape.
Scotch
®
ATG Applicator 752 for 3/4",
1/2", and 1/4" wide tape
(1/4" adapter purchased separately).
Scotch
®
ATG Applicator 3662
for 2" wide tape.
NOTE: The technical information and data provided here should be considered representative or typical only and should not be
used for specification purposes. User should evaluate the 3M product to determine whether it is fit for a particular purpose and
suitable for user’s method of application.
1
Relative Adhesion: HSE – High Surface Energy LSE – Low Surface Energy
Product Information
* 3M brand
Applicator Selection
1
2
3
4
1
2
3
4
Industrial Business
Industrial Adhesives and Tapes Division
3M Center Bldg. 21-1W-10
900 Bush Ave.
St. Paul, MN 55144
1-800-362-3550
www.3M.com/bonding
Printed in U.S.A.
© 2005 3M
70-0709-3797-7
PRODUCT USE: All statements, technical information and recommendations contained in this document are based upon tests or experience
that 3M believes are reliable. However, many factors beyond 3M’s control can affect the use and performance of a 3M product in a
particular application, including the conditions under which the product is used and the time and environmental conditions in which the
product is expected to perform. Since these factors are uniquely within the user’s knowledge and control, it is essential that the user
evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for the user’s method of application.
WARRANTY AND LIMITED REMEDY: 3M warrants that each 3M product meets the applicable specifications at the time 3M ships
the product. 3M MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY ARISING OUT OF A
COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. User is responsible for determining whether the 3M product is fit for a
particular purpose and suitable for user’s application. If the 3M product is defective, your exclusive remedy and 3M’s and seller’s sole
obligation will be, at 3M’s option, to repair or replace the product or refund the purchase price. LIMITATION OF LIABILITY: Except
where prohibited by law, 3M and seller will not be liable for any loss or damage arising from the 3M product, whether direct, indirect,
special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability.
Adhesive
Product Tape Description Temperature
Solvent
Relative Application
Type Number Thickness Resistance
Resis-
Adhesion
1
Ideas
w/o liner Minutes Days tance
HSE
LSE
Mils (mm) Hours Weeks
300
976 2.0 High tack. 250˚F
150˚F
Med. High High Attach fabric swatches in sample books.
(0.05) Excellent (121˚C)
(66˚C)
969 5.0
adhesion to
Assemble point-of-purchase displays.
(0.13)
most plastics.
Bond trim strips to furniture or luggage.
Bond labels to plastic toys.
Attach gaskets or foams.
350
926 5.0 High 450˚F
300˚F
High High High Bond fabric or trim to window blinds.
(0.13) performance. (232˚C)
(149˚C)
Bond LSE (Low Surface Energy) coated papers.
Excellent Splice aluminum coils.
temperature and Bond foam insulation.
solvent resistance. Mount name plates on award plaques.
400
970XL 1.0 General purpose. 250˚F
180˚F
Med. Med. Low Attach photos to layouts.
(0.025) Excellent (121˚C)
(82˚C)
Attach labels.
adhesion to most
924 2.0 paper stocks. Seal pocket in folders.
(0.05) Bond mat board in picture frames.
Splice paper, films, foils.
987* 1.7 General purpose bindery attaching.
(0.040)
400/
928 2.0 Differential tack. 180˚F
120˚F
Med. High/ Low/ Attach credit card in mailer.
1000
(0.05) Repositionable. (82˚C)
(49˚C)
Low Low
Core start/end tab paper, films and foils.
Attach temporary labels.