User Guide

12
Cutting and Polishing unitized wheels are long lasting and
aggressive for heavy duty blending and finishing with
uniform results. Layered “unitized” construction provides
an excellent starting point for jobs requiring the availability
of small diameters and narrow widths.
Cutting and Polishing unitized wheels can often be used to
replace many conventional abrasive products such as
rubber bonded wheels and small set up wheels.
Scotch-Brite
™
Cutting
and Polishing Unitized Wheels
Diameters: 1/2" minimum 14" maximum
Widths:
5, 7 density in 1/8", 1/4", 3/8", 1/2", 5/8", 3/4", 1"
9 density in 1/8", 1/4", 3/8", 1/2"
1" maximum all diameters
Typical • P a r t i n g line removal
applications: • Pipe thread deburring
• Heavy-duty deburring of
aerospace components
See pages 21-23 for recommended flanges/accessories
Cutting and 5 Aluminum Oxide FIN
Polishing 7, 9 Aluminum Oxide MED, CRS
Unitized Wheels 7, 9 Silicon Carbide MED
Product Name Density Mineral Type Grade
Heavy duty wheels for aggressive blending and finishing.
Long lasting and aggressive, Cutting and Polishing wheels
perform well on all kinds of tough blending and finishing
jobs. They produce uniform results quickly and easily and
are often used to replace conventional abrasives such as
rubber bonded wheels, set-up wheels and abrasive flap
wheels.
These wheels are excellent for removing defects, blending
forging marks, removing coarse grindlines, blending
machine mismatches, and providing uniform grain finish.
Cutting and Polishing wheels have demonstrated value in a
variety of applications for metal rod and tube surfaces and
are especially well suited for centerless finishing.
Scotch-Brite
™
Cutting and Polishing Wheels
Diameters: 4" Minimum 24" Maximum
Widths: 3/8"-36" in 4, 6, 8" diameters
1/2"-36" in 10, 12" diameters
3/4"-36" in 14"-24" diameters
Typical • Blending of abrasive grind lines
applications: • Centerless finishing machined parts
• Conditioning of machined
compressor shafts
• Surface finishing of hand
tools prior to plating
See pages 21-23 for recommended flanges/accessories
Cutting and 5 Aluminum Oxide FIN
Polishing Wheel 7 Aluminum Oxide VFN, FIN
MED, CRS
Product Name Density Mineral Type Grade
16
17
See page 3 for convolute vs. unitized See page 3 for convolute vs. unitized