User Guide

ManualsBrands3M ManualsOtherSCOTCH-BRITE SURFACE CONDITIONING WHEELS

Metal Finishing Wheels are a highly conformable

products that provide uniform and consistent

satin/antique finishes.

Metal Finishing wheels are used effectively to blend

and match #3 or #4 mill finishes on stainless steel and

to create brushed or satin finishes on cutlery. On softer

metals such as aluminum, copper and brass they are used

to blend out minor surface imperfections and handling

marks as well as provide the desired decorative finish.

Scotch-Brite

™

Metal

Finishing Wheels

Metal Finishing Wheel 4, 5, 6 Aluminum Oxide CRS

4, 5, 6 Aluminum Oxide MED

Product Name Density Mineral Type Grade

Diameters: 4" minimum 18" maximum

Widths: 3/4"-36" 4 density in 4"-18" diameters

1/2"-36" 5, 6 density in 4"-12" diameters

3/4"-36" 5, 6 density in 14"-18" diameters

Typical • Stainless steel blending

applications: and finishing

• Finishing of aluminum molding

• Satin finishing of builders

hardware

• Satin finishing of cutlery

See pages 21-23 for recommended flanges/accessories

Offering the same unique finishing capability of Metal

Finishing convolute wheels in small diameters and

narrow widths.

Metal Finishing unitized provides durability and value

for finishing of parts that are too narrow, tight or small

to finish efficiently with wider width wheels.

Scotch-Brite

™

Metal Finishing

Unitized Wheels

Metal Finishing Unitized 5 Aluminum Oxide MED

6 Aluminum Oxide CRS

Product Name Density Mineral Type Grade

Diameters: 1" minimum 14" maximum

Widths: 1/4", 3/8", 1/2", 1"

1" maximum all diameters

Typical • Weld cleaning and

applications: blending in stainless steel tank

• Manufacturing finishing

of builders hardware

• Finishing/blending

builders hardware

• Finishing prior to buffing

See pages 21-23 for recommended flanges/accessories

See page 3 for convolute vs. unitized