User Guide

9
An excellent choice for deburring and polishing of all
metal alloys as well as many plastics and composites.
Like EXL convolute wheels they resist smearing
and minimize heat buildup on the workpiece.
There is a wide variety of densities and grades available
from a very soft 2 density for applications requiring a
conformable product all the way to a hard, aggressive 8
density for maximum cut and durability.
Scotch-Brite
™
EXL
Unitized Wheels
EXL Unitized 2 Silicon Carbide VFN
2, 3, 4, 6 Silicon Carbide FIN
4, 6 Aluminum Oxide FIN
2, 6, 8 Aluminum Oxide MED
8 Aluminum Oxide CRS
2, 4, 6, 8 Aluminum Oxide XCS
Product Name Density Mineral Type Grade
Diameters: 1/2" minimum 14" maximum
Widths: 3, 6, 8 density 2, 4 density in
in 1/8" minimum 1/4" minimum
1" maximum all diameters
Typical • Weld cleaning
applications: • Finishing threaded parts
• Turbine blade polishing
• Metal stampings
See pages 21-23 for recommended flanges/accessories
Designed for top performance and value on a variety
of critical deburring and finishing applications.
The EXL family of convolute wheel products is especially
well suited for a broad range of deburring and finishing
needs. The unique resin system helps to minimize
smearing and the wheels show superior performance
on stainless steel, titanium and high nickel alloys.
The 8 d e n s i t yi n E X L ,E X 2o r E X 3w h e e l ss h o u l db es e l e c t e d
for o perationsrequiring a c ombinationofdeburringandfinishing.
The 9 density in EXL, EX2, or EX3 wheels performs best
in more s evere d eburring a p p l i c a t i o n sw h e r e t he w h e e li s
consistently presented with a sharp edge.
Scotch-Brite
™
EXL, EX2, EX3
Deburring and Finishing Wheels
EXL 8, 9 Silicon Carbide FIN Hard
8 Silicon Carbide MED
8 Aluminum Oxide MED
EX2 8, 9 Silicon Carbide FIN Harder
8 Silicon Carbide MED
8 Aluminum Oxide MED
EX3 8, 9 Silicon Carbide FIN Hardest
8 Silicon Carbide MED
8 Aluminum Oxide MED
Product Name Density Mineral Type Grade
Diameters: 4" minimum 24" maximum
Widths: 3/8"-36" in 4, 6, 8" diameters
1/2"-36" in 10, 12" diameters
3/4"-36" in 14"-24" diameters
Typical • Cutlery–deburring and edge radius
applications: • J e tb l a d e s–blending, f i n i s h i n g ,d e b u r r i n g
• Gun barrels–polishing
• Golf club heads–polishing, finishing
• General use deburring
Some additional sizes may be available by special request
See pages 21-23 for recommended flanges/accessories
10
11
See page 3 for convolute vs. unitized
See page 3 for convolute vs. unitized