Super Close Projection System SCP716 Operator’s Guide *ANUARY s " s #OPYRIGHT Ú - #OMPANY !LL 2IGHTS 2ESERVED
M™ Super Close Projection System SCP716 Operator’s Guide Contents Introduction Safety Information Intended Use ..................................................................................................................................................9 Safety Labels ...............................................................................................................................................12 Contents of Shipping Box Keep Your Packing Materials ...................................
Operator’s Guide 3M™ Super Close Projection System SCP716 Menu Navigation ENGLISH Main Menu...................................................................................................................................................22 Input Menu...................................................................................................................................................23 Picture Menu...............................................................................................
3M™ Super Close Projection System SCP716 Operator’s Guide Introduction Thank You for Choosing 3M Equipment ENGLISH This product has been produced in accordance with 3M’s quality and safety standards to provide smooth and trouble free use in the years to come. For optimum performance, please follow the operating instructions carefully. We hope you will enjoy using this high performance product in your classroom, meetings, presentations, and training sessions.
Operator’s Guide 3M™ Super Close Projection System SCP716 ENGLISH The following are exclusions to the above listed warranty: This warranty does not cover 3M Product that is modified or damaged through improper storage, misuse, abuse, accident, vandalism, improper installation, neglect, improper shipping, damage caused by acts of war, disasters such as fire, flood, and lightning, improper electrical current, software problems, interaction with non-3M products, or service other than by a 3M Authorized Serv
3M™ Super Close Projection System SCP716 Operator’s Guide When warranty service involves the exchange of the 3M Product or of a part, the item replaced becomes 3M property. s The exchanged 3M Product or part may be new or previously refurbished to the 3M standard of quality, and at 3M’s option, the replacement may be another model of like kind and quality. s 3M’s liability for replacement of the warranted 3M Product or part will not exceed the original retail selling price of the 3M Product.
Operator’s Guide 3M™ Super Close Projection System SCP716 ENGLISH WEEE STATEMENT: The following information is only for EU-members States: The mark shown to the right is in compliance with Waste Electrical and Electronic Equipment Directive 2002/96/EC (WEEE). The mark indicates the requirement NOT to dispose the equipment as unsorted municipal waste, but use the return and collection systems according to local law.
3M™ Super Close Projection System SCP716 Operator’s Guide Safety Information ENGLISH Please read, understand, and follow all safety information contained in these instructions prior to the use of this projector. Retain these instructions for future reference. Intended Use Before operating the machine, please read the entire manual thoroughly. This product was designed, built and tested for use indoors, using 3M lamps and hardware.
3M™ Super Close Projection System SCP716 Operator’s Guide ENGLISH D WARNING To reduce the risk associated with hazardous voltage: s Do not operate this projector in wet environments or outdoors. s Do not modify this projector or power cord. s Do not remove any screws other than those specified in the lamp replacement instructions. s Do not attempt to service the projector other than the lamp cartridge. There are no user serviceable parts inside the projector.
3M™ Super Close Projection System SCP716 Operator’s Guide D CAUTION To reduce the risk associated with intense visible light: s Avoid looking directly into the projector lens while the lamp is on. ENGLISH To reduce the risk associated with impact of a falling projector: s Use only the 3M brand wall/ceiling mounting hardware kit if wall or ceiling mounting is desired. s Installation of the 3M brand wall/ceiling kit must only be performed by qualified personnel.
Operator’s Guide 3M™ Super Close Projection System SCP716 Safety Labels ENGLISH The following safety labels are used on this product. 12 © 3M 2009. All Rights Reserved.
3M™ Super Close Projection System SCP716 Operator’s Guide Contents of Shipping Box ENGLISH This projector is shipped with the necessary cables required for standard DVD player, PC or laptop computer connections. Carefully unpack and verify that you have all of the items shown below. If any of these items are missing, please contact your place of purchase. The shipping carton contains the following items illustrated below. If any of these items are missing, please contact your place of purchase. 1.
3M™ Super Close Projection System SCP716 Operator’s Guide ENGLISH Product Description The 3M SCP716 integrates short-arc lamp and Digital Light Processing™ (DLP) technology. It accepts input from computer and/or video sources and projects a bright image through 3M™ Vikuiti™ Super Close Projection technology.
3M™ Super Close Projection System SCP716 Operator’s Guide Projector Distance from Screen and Image Size Refer to the chart below for the projector-to-screen distance and corresponding projected image size values.
3M™ Super Close Projection System SCP716 Operator’s Guide Parts Identification 1. Super Close Projection Lens ENGLISH 5 4 2. Focus Adjustment 2 3. Lens-shift 6 7 3 4. Remote Control IR Sensor 5. Status Indicator Light 6. Standby/On Button 7. Lamp Cover 8. Ventilation Slots 1 9. Control Input 10. Computer/Component Input 12 13 8 11. Slot for Kensington™ Lock 11 9 10 12. USB Port (For remote mouse functionality) 14 13. AC Power Cord Connection 14.
3M™ Super Close Projection System SCP716 Operator’s Guide I/O Module Control Panel (optional accessory) If your projector has the optional I/O Module installed, the projector functions can be operated from the I/O Module Control Panel. ENGLISH 1 2 3 5 4 6 # I/O Module Control Panel Function 1 ON/OFF Turns the projector on and off 2 Volume +/- Increases (+) or decreases (-) audio level 3 Source Switches the displayed input source.
3M™ Super Close Projection System SCP716 Operator’s Guide Bottom Terminal Panel on I/O Module Use the Bottom Terminal Panel to connect the I/O Module box to the Computer/Video source. 2 3 4 9 10 11 5 6 ENGLISH 1 I/O Module 7 8 12 13 # Bottom Terminal Panel Function 1 Audio Power Supplies power to 3M Folding Wall Mount speakers from the power supply included with the 3M Folding Wall Mount. 2 Computer2/Component2 Input for computer or component video device.
3M™ Super Close Projection System SCP716 Operator’s Guide Remote Control Functions Aim the remote control toward the projection screen or at the IR sensor on the front of the projector. Press desired remote control button to send a signal to the projector. ENGLISH ON/STANDBY ON: Press to turn projector ON. OFF: Press to display confirmation message, press again to switch projector to Standby mode. Note: The confirmation message displays to ensure unit does not get turned off accidentally.
Operator’s Guide 3M™ Super Close Projection System SCP716 Installing Batteries in Remote Control 1. Push down on cover to unlatch it. Slide cover off. ENGLISH 2. Install new AAA batteries with the correct polarities. 3. Reinstall battery cover. Note: Verify the battery cover is fully latched before using the remote control. Setup and System Configuration 20 © 3M 2009. All Rights Reserved.
3M™ Super Close Projection System SCP716 Operator’s Guide Operating Instructions Projector Start Up ENGLISH Read the Important Safeguards before operating the SCP716. After all cable connections have been completed, refer to Setup and Configuration, the projector can be powered up. For best results, please observe the following start up sequence. 1. Power ON all of the connected equipment. 2. Plug the supplied power cord into the AC inlet of the projector. 3.
3M™ Super Close Projection System SCP716 Operator’s Guide ENGLISH Menu Navigation To display the on screen menus, press the MENU button on the remote control or I/O Module. Use the remote control Up/Down ARROW buttons to select the desired menu (see table below), then pull the TRIGGER button (bottom of remote control) to display it. Use the remote control ARROW buttons within a submenu to select the various options displayed on the screen, then pull the TRIGGER button to initiate that option or setting.
3M™ Super Close Projection System SCP716 Operator’s Guide Input Menu The Input Menu, shown below, is used to select the desired computer or video input source to be displayed on the projector. ENGLISH Input Input Source: Computer 1 Computer 1 / Component 1 Computer 2 / Component 2 RCA Video S-Video Feature Description Main Input Select the Input source to be displayed on the projector. 1. Computer 1 / Component 2 [Computer 1 = default] 2.
3M™ Super Close Projection System SCP716 Operator’s Guide Picture Menu The Picture Menu, shown below, is used to adjust the picture settings to display the best possible image.
3M™ Super Close Projection System SCP716 Operator’s Guide Advanced Picture Menu The Picture Menu with the Advanced option selected, shown below, is used to adjust the projected image for Computer and Component inputs only.
3M™ Super Close Projection System SCP716 Operator’s Guide Audio Menu ENGLISH -ENU DISPLAYS ONLY IF ) / -ODULE IS CONNECTED The Audio Menu, shown below, is used to adjust the audio settings and select the audio input source to play through the projector.
3M™ Super Close Projection System SCP716 Operator’s Guide Setup Menu The Setup Menu, shown below, is used to configure the basic projector operating parameters.
3M™ Super Close Projection System SCP716 Operator’s Guide Advanced Setup Menu ENGLISH The Advanced Setup Menu, shown below, is used to initiate the PIN code feature (turn On/Off) and set the PIN code. Setup PIN Input Source: Computer 1 PIN Authentication Change PIN Network Control Off · On X X X Feature Description Range Default PIN Authentication Turn the PIN code security feature On or Off. N/A Off 0–9 3349 On/Off On Change the 4-digit PIN access code as desired. Set PIN code .
3M™ Super Close Projection System SCP716 Operator’s Guide Information Menu The Information Menu, shown below, is used to display current projector configuration settings. Input Source: Computer 1 Input Resolution H Frequency V Frequency Lamp Hours System Hours IP Address Net Mask Gateway ENGLISH Information 1024 x 768 31.75 KHz 60 Hz 1235 2356 192.168.1.10 255.255.255.0 192.168.1.1 User Ver. 0.0.
3M™ Super Close Projection System SCP716 Operator’s Guide ENGLISH Machine Specifications Item Specification Acoustic Noise Level Normal Mode: Typical 32 dB(A) ECO Mode: Typical 35 dB(A) Auto Detect & Install Automatically recognizes the connection of I/O module Automatically saves user adjustments Computer Compatibility Horizontal Sync: 69 kHz Vertical Sync: 85 Hz Conditions for usage environment Rel Humidity:10-80% Altitude: 0-2286m Temperature: /10-35C (50-95F) Dimensions 328.94 x 264.
3M™ Super Close Projection System SCP716 Operator’s Guide Lamp Replacement ENGLISH 11 12 1 10 2 9 3 8 4 7 6 5 Hg www.lamprecycle.org © 3M 2009. All Rights Reserved.
3M™ Super Close Projection System SCP716 Operator’s Guide Troubleshooting ENGLISH Common Problems and Solutions Symptom No power. No picture or sound. The lamp will not ignite or has turned off. Sound is heard with no picture. Picture is displayed with no sound Picture is dark or dim. Desired input source cannot be detected. Cause Solution The power cord is disconnected. Insert the power cord into AC socket. The desired input source is not selected.
3M™ Super Close Projection System SCP716 Operator’s Guide Projector Indicator Lights Indicator Signal on Projector Stand by Orange LED (always ON) Lamp Strike Orange LED (Flashing) Normal Operations Green LED (always ON) Fan Error Red LED (One flash every second) ( s s Thermal Error Red LED (Two flashes every second) ( ss ss DDP2230 Error Red LED (Four flashes every second) ( ssss Cooling (Lock Out) Red LED (Solid light) Download Mode Green LED (Fast flash), then both Green and Orang
Operator’s Guide 3M™ Super Close Projection System SCP716 Replacement Parts and Accessories ENGLISH Replacement Parts Name of Part 3M Part Number VGA Cable, 1.8 m 78-8118-2338-1 Remote Control 78-8134-7200-4 USB Cable, 1.
3M™ Super Close Projection System SCP716 OtherGuide Care Operator’s ENGLISH © 3M 2009. All Rights Reserved.
ENGLISH Important Notice All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use.
